SI wonder if that type of telemetry is part of the export, if so probably wouldn't be too hard to implement in Walmis's VPForce telemetry app, I say confidently as a person who has no idea how hard it actually is to implement 
DThat’s beyond larp
TThose oscillations is why I like the MSFFB2, the IR sensor means I can leave two fingers high up on the grip and maintain control but disable FFB, when it starts oscillating like crazy
MAn LED/LDR optical switch like that can be implemented on a Rhino without much trouble, there's already a way to use an e-stop button.
I'd rather have adjustable spike filter though, it's distracting and for the stick to go limp when you're hands not in the one position. Irl long flights you sometimes switch hands, or use super relaxed grip, maybe just with your fingertip for a bit, or your knee while eating a sandwich or 'look ma no hands!' :p
I'd rather have adjustable spike filter though, it's distracting and for the stick to go limp when you're hands not in the one position. Irl long flights you sometimes switch hands, or use super relaxed grip, maybe just with your fingertip for a bit, or your knee while eating a sandwich or 'look ma no hands!' :p
WThat's with endstops enabled?
MEndstops did it worse so I just turned them off
MI have a bit of damping on (can't remember the term you use)
WI have a rate limiter on the FFB "center point" modulation, but apparently it's still too fast 
WIs it user adjustable?
Wnot yet
TI have a question on FFB effects. I am an IL2 player, don’t know if I will ever get into DCS. What FFB effects are modeled on IL2? I see there is development for extra effects using telemetry for DCS. Does IL2 have the telemetry output that things would need to be developed/scripted in the same way? Or does IL2 work differently that the extra effects work natively?
I know there was some mention of the elevator droop above but what about the stuff like AOA buffeting and weapon effects?
I know there was some mention of the elevator droop above but what about the stuff like AOA buffeting and weapon effects?
PIL2 has ffb effects built in, you get rumble/bumpy effects on taxi & takeoff, flaps & gear down give rumble effects too, firing the gun gives vibration/shake, stick moves with trim, buffeting effect at stall high AoA. I'm sure there are other subtle effects also, I haven't played IL2 lately.
TThanks for the info!
Pno worries m8
VHow do you make the Autopilot work with the Tomcat?
For me it doesn't work, I press the reference button and the light goes out but the plane climbs or dive as no autopilot is engaged. Only once (and I don't know how) it worked
For me it doesn't work, I press the reference button and the light goes out but the plane climbs or dive as no autopilot is engaged. Only once (and I don't know how) it worked
VAlso the trim center and the stick position doesn't match with the tomcat...if the trim is at 0 (center position) the stick is shifted forward
JThat's true to life from what I get. Autopilot works as well like a Charme
JYou got only like around 40% forward movement compared to backwards range of motion
Vyes I know that, and this is not what I am complaining about...the thing is that it trim is set to center (both watching trim needle in pit, and ctrl+enter windows) the stick is not centered but shifted forward (both physically and both watching ctrl+enter window)
VWhat do you do to use the autopilot?
I trim the aircraft as well as possible for level flight, enable Autopilot, enable alt hold switch, press the nws button...the reference light turn off...and the aicraft doesn't fly level
I trim the aircraft as well as possible for level flight, enable Autopilot, enable alt hold switch, press the nws button...the reference light turn off...and the aicraft doesn't fly level
JHmm.... basically the same. Do you use any curves? I found the Rhino so precise, I neither use curves nor dead zones.
JDid you enable FFB trim in special settings
JNot sure if that would make a difference.
JAP works great, rhino also has that 1hz movement you see in the pit
SHave you clicked the FFB in the F-14 Special options? Without that there are all kinds of problems, otherwise the way you describe is how to enable the AP.
RAfter scratching my head for a while on this one I realised that it like that because the Tomcats grip is actually tilted backward from the main lower shaft of the stick. You can see it in pictures. So to correct it you would need a physical adapter that replicates this.
VFFB trim implementation?yes i ticked that
SI play in VR and I guess I never really notice or am bothered by it. A few modules like the A-10 and to a degree the Hornet are done that way. The interesting thing is even if the stick is offset, in the game window the 'cross' in the control window is also offset so it should appear centered relative to where the axis cross if that makes sense.
R
SVirus, for the F-14 there are two places, 1) regular DCS options and 2) in the special options, you have to go to the F-14 itself and there is a checkbox in there you need to tick as well. I was having all kinds of problems with it until I ticked the special option.
RThat option doesn't correct the physical location of the stick.
Vyes I know...and I have it ticked...also the trim moves the stick
S@Roller25 Are you positive that the stick being slanted is being 'modeled' in the FFB implementation the same as just less travel? I think we are talking about two different things here.
S@virusam Does the regular AP work without altitude hold? or just can you trim out the airplane in general without the stick requiring constant back pressure? If so then there may be something wrong somewhere else. Are you using an extension that is offset from the base that is maybe pulling?
RThe stick is definitely modelled on the position of the main shaft, not the grip.
VI need to try other modes. Usually for me the only useful one is alt hold
SYa, just enabling the AP functions as sort of an attitude hold within reason(constraints). All I know is mine was wonky until I checked the box in the special options. However if there is an issue with the centering/offset - just speculating - but based on the other behavior it seems like the tomcat is very sensitive with the FFB stuff and can get into a situation with a 'runaway' stick.
SProbably basic solutions you've already tried but just in case, make 10000% sure no other peripheral is bound to the pitch/roll axis. I know a lot of them default to that and it's usually fine to leave it but just in an abundance of caution I'd clear it. Otherwise, when you're saying it's off-centered in the game control display, you mean it's off center where the axis lines cross, or just off centered from the centerpoint, but otherwise on the cross? I have a meeting in 8 minutes but after that if I can I'll hop in and check how my control window looks.
Vi will post a screenshot asap
SOk, I'll check 1) Verify the attitude hold works more less same as it did pre-ffb 2) position of stick both physically and in-game window with 0 trim and level flight no AP.
V
Vstick at mission start
Vstick position with trim centered
Vffb enabled
Vtrim ffb implementation in special options enabled
SOk, so I just tested mine and it does the same thing. I think that is the way it's supposed to be. The autopilot (attitude) works same as before, and the plane will kind of 'stick' where you leave it. Engaging altitude hold also works, I think they desensitized it a bit but it used to require damn near 0 +/- FPM, I think I engaged it with ~200 or so and it worked fine. When holding wings level the stick is also basically where it is on your control indicator. FYI the trimmer does not work when you have the base AP engaged.
S@virusam Also, I guess to confirm - maybe I should have searched first lol. from: https://forum.dcs.world/topic/235939-no-bug-ffb-issues/ (tldr; it's supposed to work like it is)
MI can I ended up just calibrating a way shorter Y axis for this. I calibrated from the seat to maybe 70 percent up
HThis is how the actual plane is