You need to open up the "Tune" dialog for friction and play around with the values to get a stable r

You need to open up the "Tune" dialog for friction and play around with the values to get a stable response, also you may need to increase the filter bandwidth, try 8-10 Hz.

Wwalmis You need to open up the "Tune" dialog for friction and play around with the valu...

leninjahd•4/4/23, 12:00 PM

works with P = 2

Wwalmis Maybe you need to calibrate it with a wingwing base? I think WW stores calibrat...

recoilfx•4/4/23, 12:03 PM

Yep! Re-calibrating the grip with WW's base worked! I guess somehow the stored value got messed up.

recoilfx•4/4/23, 12:03 PM

Thank you so much!

Rrecoilfx Yep! Re-calibrating the grip with WW's base worked! I guess somehow the stored v...

PiNKSH!T•4/4/23, 12:07 PM

So I won't be able to buy just the WW grip I'll need the base too for calibrating it? Thank sux, I wonder if Virpil is the same?

walmisOP•4/4/23, 12:26 PM

Not sure, might work out of the box. First time I heard this instance.

PPiNKSH!T So I won't be able to buy just the WW grip I'll need the base too for calibratin...

recoilfx•4/4/23, 12:55 PM

Yeah, it seems like that might be the best case, at least for me. Everything was working on the WW base before I transplanted it to the Rhino. Buttons works, but not the axis. Then, I went back to WW's base and recalibrated it and all the axis are working now. It could also be that I was working from a motor/pcb kit and had do the wire harness myself, and somehow that tripped the grip's memory during the whole process, so the calibration value had to be redone. In any case, I think it would be prudent to get the base.

Wwalmis Not sure, might work out of the box. First time I heard this instance.

PiNKSH!T•4/4/23, 1:14 PM

would it be possible to implement this type of calibration into the Rhino software in the future?

AndyHill•4/4/23, 1:44 PM

the manual needs stuff on how to use the ww adapter, btw

PPiNKSH!T So I won't be able to buy just the WW grip I'll need the base too for calibratin...

Knight59•4/4/23, 3:08 PM

Virpil doesn't require this and all axis can be calibrated in the VPForce config tool.

KKnight59 Virpil doesn't require this and all axis can be calibrated in the VPForce config...

Beathmeister•4/4/23, 3:37 PM

That’s my experience. The DLC axis on the VFX grip works a charm. I can finally wrestle the cat down to the deck!

Wwalmis Not sure, might work out of the box. First time I heard this instance.

Mike (Mugs)•4/4/23, 4:19 PM

Worked for me out of the box, got my ww f16 grip a couple of days ago

SundogZeus•4/4/23, 4:27 PM

Is anyone experiencing crashes on mission load in DCS 2.8 OB? Seems to be a problem with helicopters. Wondering if I have a conflict somewhere in DCS settings.

walmisOP•4/4/23, 4:40 PM

try checking the dcs.log file

SSundogZeus Is anyone experiencing crashes on mission load in DCS 2.8 OB? Seems to be a prob...

miki•4/4/23, 6:25 PM

When did you update? Is mission made before update? And are you trying single thread or multi thread version?

Mmiki When did you update? Is mission made before update? And are you trying single th...

SundogZeus•4/4/23, 7:45 PM

Seems to be related to VR. No issues with 2D. Still debugging. #

SundogZeus•4/4/23, 7:47 PM

Next question is: I only get stick shake effects on WW2 aircraft. Are there supposed to be periodic effects like stick shaker or weapon effects in DCS for modern aircraft?

LeLv30_Superbus•4/4/23, 8:17 PM

No "DCS-wide" effects. Everything is up to the module author. Some modern jets have some effects others have nothing. I don't expect there to be weapons effects while firing in any modern jet. I hear anything by Heatblur has a good FFB implementation (F-14, soon F-4).

SSundogZeus Seems to be related to VR. No issues with 2D. Still debugging. #

miki•4/4/23, 8:20 PM

I have same issues with some missions when I run MT version

LLeLv30_Superbus No "DCS-wide" effects. Everything is up to the module author. Some modern jets h...

SundogZeus•4/4/23, 8:33 PM

That’s what I figured. Thanks for that.

Mmiki I have same issues with some missions when I run MT version

SundogZeus•4/4/23, 8:34 PM

Ok. Good to know. It may have been a mod conflict.

SSundogZeus Next question is: I only get stick shake effects on WW2 aircraft. Are there supp...

walmisOP•4/5/23, 6:19 AM

TelemFFB is the answer to this lack of implemention from DCS side.

Wwalmis TelemFFB is the answer to this lack of implemention from DCS side. 🙂

Naudiz•4/5/23, 7:39 AM

Does TelemFFB respect individual modules? Or is it something you adjust yourself?

NNaudiz Does TelemFFB respect individual modules? Or is it something you adjust yourself...

walmisOP•4/5/23, 7:40 AM

It can be configured per aircraft

Wwalmis It can be configured per aircraft

Naudiz•4/5/23, 7:41 AM

Cool, cheers

NNaudiz Cool, cheers

ddrake1984•4/5/23, 8:03 AM

Well.. it can be, but there is no real instruction

Dddrake1984 Well.. it can be, but there is no real instruction

Naudiz•4/5/23, 8:18 AM

Does it come with presets per aircraft?

walmisOP•4/5/23, 8:22 AM

You can check it out, it's open source.
https://github.com/walmis/VPforce-TelemFFB
https://github.com/walmis/VPforce-TelemFFB/blob/master/config.ini

Merlins51•4/5/23, 7:14 PM

Is there any chance of an executable for TelemFFB? Have tried following the instructions to install it but can't get it to run.

MMerlins51 Is there any chance of an executable for TelemFFB? Have tried following the ins...

walmisOP•4/5/23, 7:19 PM

You can find it in the releases section: https://github.com/walmis/VPforce-TelemFFB/releases/tag/v0.1.3

Merlins51•4/5/23, 7:20 PM

You beautiful man!!

recoilfx•4/6/23, 2:12 PM

I am trying to figure out ways to have independent spring X and Y forces in DCS per aircraft. From my cursory reading of the code, so far TelemFFB have two man effects, periodic and constant, but no spring effect. Is it possible to get the spring effect implemented in the future?

walmisOP•4/6/23, 2:29 PM

Yeah, It will be available in the next push (with the MSFS stuff)

Wwalmis Yeah, It will be available in the next push (with the MSFS stuff)

recoilfx•4/6/23, 2:55 PM

https://tenor.com/view/animals-rhino-baby-dance-lol-gif-3520560

Tenor

dancing rhino

recoilfx•4/6/23, 2:55 PM

YAYYY!!!! Thank you Walmis!

Wwalmis TelemFFB is the answer to this lack of implemention from DCS side. 🙂

SundogZeus•4/6/23, 5:37 PM

Thank you. Can’t wait to try this out.

Magpie•4/7/23, 7:41 AM

Hey in the telem app what does the * mean in the config?

Magpie•4/7/23, 7:41 AM

[MiG-21.*]

walmisOP•4/7/23, 7:44 AM

It's a regular expression, matches any characters after 21 (I'm lazy to type every variant or figure out what goes after. Is it bis or Bis

)

Magpie•4/7/23, 7:49 AM

ah ok

Magpie•4/7/23, 8:12 AM

I finally played with the telem app
its great for helis but I need to do some work on the jets i guess

Magpie•4/7/23, 8:13 AM

I might change my gun feel to worward and back, its weird when it kicks at 45 degrees

Magpie•4/7/23, 8:13 AM

P51 felt good though!

Magpie•4/7/23, 8:13 AM

The rpm idea was inspired

Magpie•4/7/23, 8:29 AM

Does the buffetting ramp up?
I tried to change the f5 buffet value to 17 and the stall effect to 20 but i didnt really feel it till 25 degrees

Magpie•4/7/23, 8:29 AM

Also whats the difference between the buffet and stall effect?

walmisOP•4/7/23, 9:20 AM

buffeting_start is the AoA value when it starts playing the buffeting and it ramps up to peak value when it reaches stall AoA

walmisOP•4/7/23, 9:21 AM

It also depends on your Periodic effects slider, I've defaulted to 50% for the TelemFFB

Magpie•4/7/23, 9:31 AM

Ah brilliant, thankyou. Does it take data from say the F5 AOA meter (probably in units idk) or what degrees is actually at?

Magpie•4/7/23, 9:33 AM

Also I want to try to create the p effect for the harrier. It ramps up spring effect as you go faster. Is there a way to do this?

walmisOP•4/7/23, 9:36 AM

I've implemented spring for the next version of TelemFFB, so it will be possible then

You need to open up the "Tune" dialog for friction and play around with the values to get a stable r

Similar Threads