@walmis do you know if there's any way to get rid of those chrome/edge webusb notifications? is this

@walmis do you know if there's any way to get rid of those chrome/edge webusb notifications? is this just a by product of the type of APIs used by the firmware?

amadeusOP•10/30/23, 7:07 PM

i.e. whenever a rhino is plugged in, they pop up

Aamadeus @walmis do you know if there's any way to get rid of those chrome/edge webusb no...

Number481•10/30/23, 7:28 PM

uninstall all traces of Edge from your machine and then call a witch doctor to make sure it is pure... then install Brave

Number481•10/30/23, 7:29 PM

I can't get Edge to stop it either... then the notifications get 'stuck' and the only way to get them to go away is to kill all the edge processes

amadeusOP•10/30/23, 7:31 PM

chrome does it too lol, so i get double

amadeusOP•10/30/23, 7:31 PM

but none of my other controllers have this problem, i assuming it's something related to a webusb api?

NNumber481 I can't get Edge to stop it either... then the notifications get 'stuck' and the...

amadeusOP•10/30/23, 7:32 PM

yeah, if i forget to close it, it seems to get stuck heh, and with an ultrawide, it's something that can sometimes be missed lol

Number481•10/30/23, 7:33 PM

Only have Edge and Brave (my default).. Brave will popup if you plug/replug.. but it goes away by itself or you can close it.. edge is a PITA and I think their WebUSB is messed up

amadeusOP•10/30/23, 7:34 PM

uninstalling the browsers isn't something i can really do given my line of work/job

Number481•10/30/23, 7:38 PM

I did find some documentation on hard-disabling WebUSB in Edge via GPO but never went very far down that path

walmis•10/30/23, 7:38 PM

There's a chrome flag that might help:

Wwalmis There's a chrome flag that might help:

Number481•10/30/23, 7:38 PM

edge seems to ignore that (I have it disabled)

Wwalmis There's a chrome flag that might help:

amadeusOP•10/30/23, 8:12 PM

oh sick, will def shut this off in chrome

amadeusOP•10/30/23, 8:19 PM

i'll try both of these! much appreciated!

amadeusOP•10/31/23, 5:35 AM

doing this in chrome and edge appears to have fixed the problem! thanks!

NNumber481 you can add these to the msfs propeller aircraft config, or to a specific aircra...

Snooper•11/1/23, 2:08 PM

hi, with the new version and after testing, the engine rumble makes the rhino rumble a lot making it disconnect the X axis as before. but I noticed that if I cut the engine the effect goes away in the TelemFFB but the rhino keeps rumble. any idea? I'll turn it down at low RPM and check. if not I have to turn it off for now

SSnooper hi, with the new version and after testing, the engine rumble makes the rhino ru...

Number481•11/1/23, 2:23 PM

it is unlikely that any of the rumble effects are causing your axes to go into protection mode and disconnect. If your screenshot above 🧰support is still accurate, you have the "Periodic Effects LPF" set to 0Hz.. I can't give you a technical explanation, but I can tell you that that will not play nicely with the effects in TelemFFB. The default is 20Hz I believe

walmis•11/1/23, 2:30 PM

Oh yea, didn't notice that! 0Hz on periodic will definitely cause problems, set it to 20Hz @snooperoldschool

Snooper•11/1/23, 2:32 PM

ok, if I changed it it was by mistake because I dont recall messing with that!!!

Snooper•11/1/23, 2:33 PM

I'm positive sure that I didn't change that!

Snooper•11/1/23, 2:33 PM

thanks!

walmis•11/1/23, 2:34 PM

No prob, maybe a firmware update caused it, who knows

Snooper•11/1/23, 2:38 PM

thats was the culprit, problem solved, now i runs like a kitten, so much I need to put more intensity in the low rpm rumble lol

Snooper•11/1/23, 2:50 PM

but I have something here

Snooper•11/1/23, 2:51 PM

if I cut the engine I get all rumbling again until it disconnects.

Snooper•11/1/23, 2:54 PM

If I set engine_rumble_lowrpm_intensity = 0.2 after cut the engine have the same behavior .

SSnooper If I set engine_rumble_lowrpm_intensity = 0.2 after cut the engine have the same...

Number481•11/1/23, 2:56 PM

cut the engine on the ground or cut the engine in the air?

Snooper•11/1/23, 2:57 PM

all in the ground

Snooper•11/1/23, 2:57 PM

and the only thing that solves it is disconnect and connect again

Snooper•11/1/23, 2:58 PM

the behavior dont shows at 0.1

Snooper•11/1/23, 2:58 PM

I have to do more testing, i'll report back.

SSnooper I have to do more testing, i'll report back.

Number481•11/1/23, 3:04 PM

what is your

engine_rumble_lowrpm

engine_rumble_lowrpm

setting? The effect follows the prop RPM... so if the prop is stopped, the effect should stop

Snooper•11/1/23, 4:59 PM

it happened at 0.2

Snooper•11/1/23, 5:00 PM

and actually after the engine cut the effects go out in the app but the rhino keeps shaking

Snooper•11/1/23, 5:00 PM

i'll make a video , its better to see it instead of write it up, because it looks something more is happening in the background.

walmis•11/1/23, 5:01 PM

Does the telemFFB log indicate any errors? Sounds like USB could be picking up interference or smth.

Wwalmis Does the telemFFB log indicate any errors? Sounds like USB could be picking up i...

Snooper•11/1/23, 5:03 PM

the only error is after some seconds the beep and the X axis disconnect with that previous error.

walmis•11/1/23, 5:03 PM

ahh, try reducing the the LPF from 20Hz to 15Hz

Snooper•11/1/23, 5:07 PM

its like its getting stronger with each start I do

Snooper•11/1/23, 5:08 PM

Motor X: FAULT_UNEXPECTED_D_CURRENT

Snooper•11/1/23, 5:09 PM

Snooper•11/1/23, 5:10 PM

changing from 20 to 15hz look that helped somehow but just to mitigate it

Snooper•11/1/23, 5:11 PM

what I'm doing is start the engine and stop it several times

Snooper•11/1/23, 5:11 PM

i'll record it

walmis•11/1/23, 5:11 PM

What happens here when you do it?

Snooper•11/1/23, 5:13 PM

where is that?

walmis•11/1/23, 5:13 PM

Debug tab

Snooper•11/1/23, 5:13 PM

one sec

Snooper•11/1/23, 5:14 PM

Snooper•11/1/23, 5:14 PM

first start

walmis•11/1/23, 5:14 PM

can you scroll loaded effects to the bottom?

@walmis do you know if there's any way to get rid of those chrome/edge webusb notifications? is this

Similar Threads