Hi @walmis - loving the base- thanks for the support. This was the issue- but now- I can't control t

Hi @walmis - loving the base- thanks for the support. This was the issue- but now- I can't control the heli- as I don't have the full range of movement I need with the stick. Any suggestions?

JakeSixx33 | 744 |•11/14/23, 3:51 PM

@walmis @Number481 Hi, I just installed the latest build for TelemFFB and now I am getting this error. I haven't had this issue with previous upgrades. Not understanding the responses google-ing a fix as this is my first need to use/run python.

TBH10CoyOP•11/14/23, 3:52 PM

I had tweaked the axis to ensure the movement mapped 1:1 - and this involved some tweaking

JJakeSixx33 | 744 |@walmis @Number481 Hi, I just installed the latest build for TelemFFB and now I ...

walmis•11/14/23, 3:55 PM

Are you launching the executable using a shortcut?

JJakeSixx33 | 744 |@walmis @Number481 Hi, I just installed the latest build for TelemFFB and now I ...

Number481•11/14/23, 3:55 PM

did you maybe copy the exe to your destkop instead of a shortcut?

TTBH10Coy Hi @walmis - loving the base- thanks for the support. This was the issue- but no...

AndyHill•11/14/23, 4:22 PM

What prevents you from having full range of movement? If your legs or some other body parts prevent you from moving the stick all the way, you might want to limit the range in software or get a hardware limiter and calibrate accordingly

AAndyHill What prevents you from having full range of movement? If your legs or some other...

TBH10CoyOP•11/14/23, 5:13 PM

Legs/seat- will have a go in the Rhino software

TTBH10Coy Legs/seat- will have a go in the Rhino software

TBH10CoyOP•11/14/23, 5:38 PM

Done- and thank you- this now sorted. One final issue and if you have a solution to this one I will be in Huey heaven. I am using a Vipril Z extension to position my grip in the right place. This means the weight of the grip (Alpha Prime) casues a slight downward pull on the base. Is it possible to zero the Rhino on this point? I.e. the rest position that comes into being with the sag casued from the grip?

TTBH10Coy Done- and thank you- this now sorted. One final issue and if you have a solution...

Number481•11/14/23, 5:55 PM

set up the balance springs settings per this: 📃general then turn on 'adaptive recentering' for additional centering help (I use the z-extension with a heavy alpha prime grip..)

NNumber481 did you maybe copy the exe to your destkop instead of a shortcut?

JakeSixx33 | 744 |•11/14/23, 6:31 PM

Thank you both for responding. I must have copied the executable. I made a new shortcut and all is well. Thanks again.

audax•11/15/23, 8:34 PM

Tiny problem with the Rhino and the KA-50: I set it to "INSTANT TRIM (DEFAULT)" as per the manual. I enabled force feedback in the misc options.
Whenever I trim in the KA-50, I get a force to the center of the stick while I press the trimmer.

audax•11/15/23, 8:39 PM

Same problem in the UH-1

audax•11/15/23, 8:46 PM

I accidently set the knob to y-trim.

audax•11/15/23, 8:54 PM

Well… my x-axis is inverted. But when i set the axis acutally to "inverted" in the config, then the force feedbac effects are the wrong way around.

Aaudax Well… my x-axis is inverted. But when i set the axis acutally to "inverted" in t...

Number481•11/15/23, 8:56 PM

dont invert anything in DCS.. if youve mounted your base backwards (buttons away from you), invert the axes in configurator.. leave them normal in DCS

audax•11/15/23, 8:57 PM

I didn't mount the base backwards and my y axis works fine. I did not invert the axis in the config nor in DCS.

audax•11/15/23, 8:57 PM

I'll check with another aircraft

audax•11/15/23, 8:58 PM

the gamecontroller settings in windows also show the same problem.

audax•11/15/23, 8:58 PM

So at least it's independent of DCS

audax•11/15/23, 8:58 PM

I reset the config and the problem remains

Number481•11/15/23, 8:59 PM

the proper default inversion settings in configurator are, X=inverted checked, Y= not checked

audax•11/15/23, 8:59 PM

Oh. It didn't set it like that when I reset the config!

Number481•11/15/23, 9:00 PM

you want to load the default.vpconf thats in the install directory

audax•11/15/23, 9:01 PM

Having inverted as the default is… weird

AndyHill•11/15/23, 9:04 PM

the configurator can't really know which way you have the base installed

Number481•11/15/23, 9:07 PM

This is the answer.. sure walmis could invert the inversion logic in the code to make the rhino motor orientation correct with both set to non-inverted.. but then your motors would both be working in different directions if you had them sitting on the table getting ready for a DIY build.

audax•11/15/23, 9:13 PM

I was just confused by the "reset config" button

Vakarian•11/15/23, 10:47 PM

So, I think I'm the first one here to do this. Was doing some circuits with the F-15E, on landing during aerobraking this happened

@walmis what's the quickest way to order new adapter?

VVakarian So, I think I'm the first one here to do this. Was doing some circuits with the ...

ddrake1984•11/15/23, 11:35 PM

Not the first

ddrake1984•11/15/23, 11:35 PM

ddrake1984•11/15/23, 11:36 PM

This was mine

DeltaVJ•11/16/23, 12:32 AM

where can I have a spare one so I have stock before it breaks?

ddrake1984•11/16/23, 12:41 AM

I bought a spare one

VVakarian So, I think I'm the first one here to do this. Was doing some circuits with the ...

walmis•11/16/23, 6:28 AM

You can use the order form for either the full adapter or you can write that you want spare parts.
P.S. I've improved that screw part a while ago so hopefully there will be no more breakage reports

ddrake1984•11/16/23, 6:32 AM

Mine wasnt a result of screws tho

ddrake1984•11/16/23, 6:32 AM

ddrake1984•11/16/23, 6:32 AM

No screws reinforce this bit

Dddrake1984 Mine wasnt a result of screws tho

walmis•11/16/23, 6:39 AM

That broken bit is the screw

ddrake1984•11/16/23, 6:42 AM

Ah, I call it a collar

a screw for me is

ddrake1984•11/16/23, 6:42 AM

Dddrake1984 Ah, I call it a collar 😅 a screw for me is

PiNKSH!T•11/16/23, 6:43 AM

something else comes to mind for me when I think of a screw

DxMarovitch•11/16/23, 10:46 AM

Hey there, I am considering getting the HPG H160 for MSFS, I was wondering if that in conjunction with your TelemFFB software, would work with a MS Sidewinder FFB2? Thanks in advance for any info

DDxMarovitch Hey there, I am considering getting the HPG H160 for MSFS, I was wondering if th...

walmis•11/16/23, 10:51 AM

Hi, in the current state it will not work with other devices other than the Rhino, but in theory it's possible to port the hardware layer of telemFFB to other hardware.

Wwalmis Hi, in the current state it will not work with other devices other than the Rhin...

DxMarovitch•11/16/23, 10:55 AM

Gotcha, thank you for the info!

Jehly•11/17/23, 1:56 AM

Not sure if anyone else has experienced this, but over the last FFB update or two I noticed it flips my rudder input and there's no way for me to re-bind or invert it from inside DCS. If I close TelemFFB, works normal.

Jehly•11/17/23, 1:56 AM

Have you experienced this, @Number481?

JJehly Not sure if anyone else has experienced this, but over the last FFB update or tw...

Number481•11/17/23, 1:57 AM

Talking fixed wing? Very high probability there are bugs in the rudder trim following feature that I haven't found yet.

Number481•11/17/23, 1:59 AM

try pedal_trimming_enabled = falsepedal_trimming_enabled = false... I had no problems with it in any of the module testing I did.. but I certainly did not test all modules and didn't actually fly around much

Jehly•11/17/23, 2:03 AM

I'm flying specifically A10CII

Jehly•11/17/23, 2:03 AM

Is that in the pedals.ini file

JJehly I'm flying specifically A10CII

Number481•11/17/23, 2:06 AM

It’s in the default config but you can add it in your userconfig

Hi @walmis - loving the base- thanks for the support. This was the issue- but now- I can't control t

Similar Threads