I’ve never tried the Blackhawk mod…I’m not sure if it supports FFB or not. (Many community mods don

I’ve never tried the Blackhawk mod…I’m not sure if it supports FFB or not. (Many community mods don’t) Others may know better. You may have to use the hardware force trim option in the configurator software.

TelemFFB won’t do anything here since the actual axis FFB is native to DCS.

NNumber481 I’ve never tried the Blackhawk mod…I’m not sure if it supports FFB or not. (Man...

Str][ker•3/22/24, 12:53 AM

Thanks! If I use an official module such as the Huey or Apache, this all should work I assume. I do use Telem FFB but as you mentioned, it doesn’t do anything for the trim. I will play around with the configurator software as well.

SStr][ker Thanks! If I use an official module such as the Huey or Apache, this all should ...

Number481OP•3/22/24, 12:57 AM

yeah, for the official modules, you should only need to configure the trim release binding (in dcs) and then make sure the special settings are correct (should be "default" or "instant" for any module).

Snubblaren•3/22/24, 8:38 AM

Perhaps a hard question but how long time is the waiting time for a new base today?

scriptedpr•3/22/24, 8:41 AM

At least 12 months

SSnubblaren Perhaps a hard question but how long time is the waiting time for a new base tod...

Stryker990•3/22/24, 9:11 AM

If u aint signed up yet do so if ur interested no need to wait in the end u get enough should-i-buy-thinking anyway

SStryker990 If u aint signed up yet do so if ur interested no need to wait in the end u get ...

Snubblaren•3/22/24, 9:12 AM

Snubblaren•3/22/24, 9:12 AM

Already have one a friend wants one

Spelljammer1•3/22/24, 10:08 AM

Has anyone perhaps tried the Rhino with the Force Feedback plugin for Elite Dangerous?

SSnubblaren Click to see attachment

Scarlet•3/22/24, 10:12 AM

Nice counterweight there, mate XD

Less bodged than mine

Red Magic•3/22/24, 11:07 AM

The dining room chair is my favorite part

VPforceBot•3/22/24, 11:28 AM

:package:

RHINO #0456 Has Shipped!

VPforceBot•3/22/24, 11:33 AM

:package:

RHINO #0457 Has Shipped!

VVette Since I am not 100% sure about the process. Once I put in my preorder am I suppo...

Asdforce•3/22/24, 11:51 AM

When your number comes up, or thereabouts.

SScarlet Nice counterweight there, mate XD Less bodged than mine

Snubblaren•3/22/24, 12:15 PM

It's easier to grill through plastic than steel, the only downside is that you needed a lot more of volume

jusche89•3/22/24, 12:30 PM

Received my Rhino last week and it is just stunning! Will start fine tuning now. Just one question: which part of the aircraft.cfg do i have to call TelemFFB profiles, to be correctly recognized?

DDr. No So im working on getting this EDForceFeedback to work from this elite dangerous...

Spelljammer1•3/22/24, 12:56 PM

a bit of a necro but thanks so much for sharing, I was just looking for this! my Rhino is on the way, trying to get all the configs prepared

Red Magic•3/22/24, 2:02 PM

When setting up trim binds for the Apache, are you supposed to dual bind your force trim button between Telem and DCS, so they use the same button

Asdforce•3/22/24, 2:06 PM

Shouldn't need to. Dcs apache does force trim + ffb natively. Rhino's own force trim function is for sims/modules that don't do it correctly.

Jjusche89 Received my Rhino last week and it is just stunning! Will start fine tuning now....

Number481OP•3/22/24, 2:11 PM

I'll assume you mean for MSFS since thats the only one I know that has aircraft.cfg.

TelemFFB gets the name from simconnect, which I believe uses the "Title" that is in the aircraft.cfg file. Make sure you're using the WIP version of TelemFFB (pinned in #VPforce-TelemFFB). If you load an aircraft that does not have a profile, you will see a big purple button you can click to create a new profile: https://docs.google.com/document/d/1YL5DLkiTxlaNx_zKHEYSs25PjmGtQ6_WZDk58_SGt8Y/edit#heading=h.z3ihipnpx839

RRed Magic When setting up trim binds for the Apache, are you supposed to dual bind your fo...

Number481OP•3/22/24, 2:13 PM

There's no trim button setting in TelemFFB for DCS since that is handled natively by the sim. As Adsforce pointed out, the hardware trim in configurator is meant for use with sims that don't have such functionality and/or aren't handled by TelemFFB

NNumber481 I'll assume you mean for MSFS since thats the only one I know that has aircraft....

jusche89•3/22/24, 2:57 PM

Thanks a lot! Haven't been using the WIP version before - makes things much more comfortable to adjust! Is there any way to find specific values for the Trim Gain Physical setting for individual aircraft types?

NNumber481 I would say not. Simply because there are so many other errors in that file. T...

Stains•3/22/24, 3:09 PM

Ran memtest86 and it was indeed a RAM issue. Thanks for looking at that log!

SSpelljammer1 Has anyone perhaps tried the Rhino with the Force Feedback plugin for Elite Dang...

Dr. No•3/22/24, 3:49 PM

Yes and it works!
You just have to manually setup the effects with his code. I wanted to add something to merge this to the telemffb but im not a dev for Elite Dangerous.

SStains Ran memtest86 and it was indeed a RAM issue. Thanks for looking at that log!

Number481OP•3/22/24, 3:55 PM

good find! was it failing hardware or a bad memory OC?

Stains•3/22/24, 3:59 PM

No OC applied for this test, so I'm thinking failing hardware. I suppose I need to narrow it down to a known good stick and test every slot to make sure I don't have a motherboard problem.

DDr. No Yes and it works! You just have to manually setup the effects with his code. I w...

Spelljammer1•3/22/24, 4:34 PM

So neat! And thanks for your posts here about it. Do you happen to still have your file where you have set up effects?

Red Magic•3/22/24, 5:12 PM

FFBeast just popped onto my radar. Thoughts?

Red Magic•3/22/24, 5:13 PM

Looking at the spec list, the main things that stuck out to me was a higher peak torque, by quite a bit. But more expensive as well, starting at 900 EU

Fr4Ged•3/22/24, 5:46 PM

Rhino already feels like wrestling. no need for more.

Volk•3/22/24, 5:50 PM

"Forcefeed Beast"? that sounds like a farm thing

Bob Bushman•3/22/24, 6:23 PM

I'm sure someone is going to keep making beefier and beefier units until someone literally breaks and arm.

Red Magic•3/22/24, 7:05 PM

Considering my 3rd most flown module is the bf109, and it was notorious for requiring excess of 60lbs of pull lol

Fr4Ged•3/22/24, 7:17 PM

sounds like a workout

Number481OP•3/22/24, 7:26 PM

sounds like you'd need a concrete subfloor and 1/2" lag bolts to secure the damn thing to the ground. Maybe when Gorilla Wrestling 2025 comes out and I want my arms ripped of "for realism".. I'll consider needing those forces.

SSpelljammer1 So neat! And thanks for your posts here about it. Do you happen to still have yo...

Dr. No•3/22/24, 7:28 PM

Yea i can share it, i just barely got started to be honest but i set it up enough to be able to add many more effects if desired. I just dont play elite dangerous much is all. Ill try to post it here.

DDr. No Yea i can share it, i just barely got started to be honest but i set it up enoug...

Spelljammer1•3/22/24, 8:51 PM

Perfect

I'll see about continuing your work from there (provided I get it to work properly to begin with)

NNumber481 sounds like you'd need a concrete subfloor and 1/2" lag bolts to secure the damn...

Fierce_Fire•3/22/24, 9:23 PM

Only real use for large force is longer arm, but with blf04 at 6:1 I already have too much force with a 55cm arm...

f15sim•3/22/24, 9:30 PM

Anyone have a source for the 5M HTD belt in random lengths? (and not joined at the ends)

SSpelljammer1 Perfect 🙌 I'll see about continuing your work from there (provided I get it to...

Dr. No•3/22/24, 9:33 PM

If we could get a version in telemffb that would be ideal

Ff15sim Anyone have a source for the 5M HTD belt in random lengths? (and not joined at ...

mechsicko•3/22/24, 9:43 PM

You need the LL version (long length). Will look something like this: HTD 5M 15 LL

f15sim•3/22/24, 9:44 PM

Ok, thanks.

mechsicko•3/22/24, 9:44 PM

I have had good luck with seller Powge, on Ali and Amazon.. good prices and good quality

f15sim•3/22/24, 9:56 PM

long delivery times.

Fr4Ged•3/22/24, 10:24 PM

So I guess to be able to change the settings in TelemFFB I need to use the WiP version, right?

Number481OP•3/22/24, 10:42 PM

Need? No.

Want? Probably.
The old version is pretty cumbersome

Bob Bushman•3/22/24, 10:46 PM

'Stable' version of telem ffb compared to the wip is like 1982 flightsim vs msfs 2020.

Bob Bushman•3/22/24, 10:47 PM

Admittedly hyperbolic but the differences are huge.

Fr4Ged•3/22/24, 10:56 PM

also follow up question:
the Gazelle in DCS isn't really working with the trim right now or is it?

Number481OP•3/22/24, 11:07 PM

AFAIK it works. You just have to enable the separate FFB setting in its special settings and make sure the FFB curve sliders on the same page are 0.

NNumber481 AFAIK it works. You just have to enable the separate FFB setting in its special...

Fr4Ged•3/22/24, 11:55 PM

there is a module specific FF option that I had to check mark. thanks for the hint!

I’ve never tried the Blackhawk mod…I’m not sure if it supports FFB or not. (Many community mods don

Similar Threads