Perhaps a hard question but how long time is the waiting time for a new base today? 🤔
Perhaps a hard question but how long time is the waiting time for a new base today? 
SAt least 12 months
SIf u aint signed up yet do so if ur interested no need to wait in the end u get enough should-i-buy-thinking anyway
SAlready have one a friend wants one 
SHas anyone perhaps tried the Rhino with the Force Feedback plugin for Elite Dangerous?
SNice counterweight there, mate XD
Less bodged than mine
Less bodged than mine
RThe dining room chair is my favorite part
V:package: 
RHINO #0456 Has Shipped!
RHINO #0456 Has Shipped!V:package: RHINO #0457 Has Shipped!
RHINO #0457 Has Shipped!
AWhen your number comes up, or thereabouts.
SIt's easier to grill through plastic than steel, the only downside is that you needed a lot more of volume 
JReceived my Rhino last week and it is just stunning! Will start fine tuning now. Just one question: which part of the aircraft.cfg do i have to call TelemFFB profiles, to be correctly recognized?
Sa bit of a necro but thanks so much for sharing, I was just looking for this! my Rhino is on the way, trying to get all the configs prepared
RWhen setting up trim binds for the Apache, are you supposed to dual bind your force trim button between Telem and DCS, so they use the same button
AShouldn't need to. Dcs apache does force trim + ffb natively. Rhino's own force trim function is for sims/modules that don't do it correctly.
NI'll assume you mean for MSFS since thats the only one I know that has aircraft.cfg.
TelemFFB gets the name from simconnect, which I believe uses the "Title" that is in the aircraft.cfg file. Make sure you're using the WIP version of TelemFFB (pinned in #VPforce-TelemFFB). If you load an aircraft that does not have a profile, you will see a big purple button you can click to create a new profile: https://docs.google.com/document/d/1YL5DLkiTxlaNx_zKHEYSs25PjmGtQ6_WZDk58_SGt8Y/edit#heading=h.z3ihipnpx839
TelemFFB gets the name from simconnect, which I believe uses the "Title" that is in the aircraft.cfg file. Make sure you're using the WIP version of TelemFFB (pinned in #VPforce-TelemFFB). If you load an aircraft that does not have a profile, you will see a big purple button you can click to create a new profile: https://docs.google.com/document/d/1YL5DLkiTxlaNx_zKHEYSs25PjmGtQ6_WZDk58_SGt8Y/edit#heading=h.z3ihipnpx839
NThere's no trim button setting in TelemFFB for DCS since that is handled natively by the sim. As Adsforce pointed out, the hardware trim in configurator is meant for use with sims that don't have such functionality and/or aren't handled by TelemFFB
JThanks a lot! Haven't been using the WIP version before - makes things much more comfortable to adjust! Is there any way to find specific values for the Trim Gain Physical setting for individual aircraft types?
SRan memtest86 and it was indeed a RAM issue. Thanks for looking at that log!
DYes and it works!
You just have to manually setup the effects with his code. I wanted to add something to merge this to the telemffb but im not a dev for Elite Dangerous.
You just have to manually setup the effects with his code. I wanted to add something to merge this to the telemffb but im not a dev for Elite Dangerous.
Ngood find! was it failing hardware or a bad memory OC?
SNo OC applied for this test, so I'm thinking failing hardware. I suppose I need to narrow it down to a known good stick and test every slot to make sure I don't have a motherboard problem.
SSo neat! And thanks for your posts here about it. Do you happen to still have your file where you have set up effects?
RFFBeast just popped onto my radar. Thoughts?
RLooking at the spec list, the main things that stuck out to me was a higher peak torque, by quite a bit. But more expensive as well, starting at 900 EU
FRhino already feels like wrestling. no need for more. 
V"Forcefeed Beast"? that sounds like a farm thing
BI'm sure someone is going to keep making beefier and beefier units until someone literally breaks and arm.
RConsidering my 3rd most flown module is the bf109, and it was notorious for requiring excess of 60lbs of pull lol
Fsounds like a workout
Nsounds like you'd need a concrete subfloor and 1/2" lag bolts to secure the damn thing to the ground. Maybe when Gorilla Wrestling 2025 comes out and I want my arms ripped of "for realism".. I'll consider needing those forces.
DYea i can share it, i just barely got started to be honest but i set it up enough to be able to add many more effects if desired. I just dont play elite dangerous much is all. Ill try to post it here.
SPerfect 
I'll see about continuing your work from there (provided I get it to work properly to begin with)
I'll see about continuing your work from there (provided I get it to work properly to begin with)
FOnly real use for large force is longer arm, but with blf04 at 6:1 I already have too much force with a 55cm arm...
FAnyone have a source for the 5M HTD belt in random lengths? (and not joined at the ends)
DIf we could get a version in telemffb that would be ideal
MYou need the LL version (long length). Will look something like this: HTD 5M 15 LL
FOk, thanks.
MI have had good luck with seller Powge, on Ali and Amazon.. good prices and good quality
Flong delivery times. 
FSo I guess to be able to change the settings in TelemFFB I need to use the WiP version, right?
NNeed? No.
Want? Probably.
The old version is pretty cumbersome
Want? Probably.
The old version is pretty cumbersome
B'Stable' version of telem ffb compared to the wip is like 1982 flightsim vs msfs 2020.
BAdmittedly hyperbolic but the differences are huge.
Falso follow up question:
the Gazelle in DCS isn't really working with the trim right now or is it?
the Gazelle in DCS isn't really working with the trim right now or is it?
NAFAIK it works. You just have to enable the separate FFB setting in its special settings and make sure the FFB curve sliders on the same page are 0.
Fthere is a module specific FF option that I had to check mark. thanks for the hint!
RI can't wait for gorilla wrestling to come out so I can train to fly the bf109
Tanyone on that uses these with a winwing grip?
TLet me ask the same question but in a broader sense…. Coming from a Honeycomb Alpha yoke, if you could choose the best all-around grip, what would it be? Primarily for MSFS but I could see delving into the DCS world. Want to learn helis and of course still fly GA.