Fyou don't have to wait for 691 units though. loads of people don't actually order.
FMy diy never rips out of my hand, unless i "land" with the apache haha
Bits worth it for any aircraft just to get rid of center detent like servo motors did for racing sims
Balthough I fly a cirrus with a heavy center detent
Aso if I'm using my computer but not using my joystick, should I keep the red button pressed at all times? Is there any downside to this or should I just unplug it altogether?
RI press red button when not in use. Even with using comp for other stuff
IHow well does the Rhino work with IL-2? I'm not a WW2 guy, I mostly do helicopters and modern planes, but my Rhino likely less than 30 days away has my interest in WW2 piqued
CIn my experience it works great, a few quirks but I think it's great. I didn't do a lot of individual tuning but for me it is a game changer. I can say sustained dog fighting is a lot more taxing now but worth it.
GYeah. I placed my order 2 weeks ago.
V:package: 
RHINO #0468 Has Shipped!
RHINO #0468 Has Shipped!
RThere's ww2 modules in DCS you can use
Rand the free mustang
PDo you habe an ETA for this in mind?
WCurrently enroute, hopefully everything will fit and be good to go! 
V:package: 
RHINO #0469 Has Shipped!
RHINO #0469 Has Shipped!
MDid the motors ever make it through shipping for the much awaited pedal kits?
WYeah, still doing the backlog for the BLF04 kits and some final tweaks to the pedal kits.
Snice. for which pedal models are the kits intended for?
WMFG crosswinds
WMade a google form for the MFG kit, early adopters are welcome to sign up 
https://docs.google.com/forms/d/e/1FAIpQLScJy9f571afga-yYYOE5eqiEacWpqE3UigkC1hfQy6szQnN3g/viewform
https://docs.google.com/forms/d/e/1FAIpQLScJy9f571afga-yYYOE5eqiEacWpqE3UigkC1hfQy6szQnN3g/viewform
Google Docs
Enter your details here, so you can enter the queue for the VPforce MFG FFB Kit.
Once the queue progresses I will get in touch with further details.
The kit contains:
86BLF03 or 86BLF04 FFB motor
Large gear + 14T motor pulley
Belt HTD5M 400
Motor mount + fasteners
Assembled wiring
Toe brake connectors to VPforce board
Power supply - 19V 9.5A 18...
Once the queue progresses I will get in touch with further details.
The kit contains:
86BLF03 or 86BLF04 FFB motor
Large gear + 14T motor pulley
Belt HTD5M 400
Motor mount + fasteners
Assembled wiring
Toe brake connectors to VPforce board
Power supply - 19V 9.5A 18...
LWill the kit work for all MFG models, including V1?
Swhat's the best FFB experience with Rhino/TelemFFB in MSFS?
MHi, quick shout out to those using the Rhino with the DCS Apache module. I am interested in best recommended settings. I have checked the FFB box in Misc, and tried both instant trim and the no springs & FFB option. They both seem to work, the stick stays where it is when you go up on the force trim. Whats the difference between all the options when using the Rhino? Second query regards the Force trim settings in effects - what is recommended here? Third query is regarding the FFB tuning options in controls, again, whats recommended here? Answers to these questions would be appreciated, and any other tips etc to get the most realistic and effective experience. Thanks
DI guess when using ffb kit for MFG crosswinds dampener is obsolete and not needed anymore?
FYou don't have to use the force trim settings in the effects tab of the VPforce tool when playing DCS.
it is meant for games that don't natively support force trimming.
I just use moderate effects in the VPforce software and default in TelemFFB. all those are subjective to each individual user I'd guess.
it is meant for games that don't natively support force trimming.
I just use moderate effects in the VPforce software and default in TelemFFB. all those are subjective to each individual user I'd guess.
EI often find that one of my two FFB pages suddenly loses connection with DCS. What could be causing this?
Fyou are using two instances of TelemFFB at once? why?
EBecause one is for the joystick and the other is for the rudder pedals.
EJoystick and Pedal
DI think latest Wip drasticly improved forces and general vibrations and feeling in MFS in general. Anything I tried flying I was blown away how good it felt compared to before
EOn this page, I've already switched to the F-18 in DCS, but my rudder pedals are still stuck on the AH64D. This is strange, and of course, the F-18's rudder FFB feedback is definitely not available.
WI think @Number481 might have some insights here. But it's best to move telemFFB related discussions here: https://discord.com/channels/965234441511383080/1093558100713279508
Eok
Sthat's good news! I'll figure out how to install the WIP then.
any particular favourites of yours?
any particular favourites of yours?
SIt seemed okayish when I tried a helo, but the Rhino was trembling awkwardly when I tried the Dune ornithopter. 
MThanks, any comment regarding 1st & 3rd queries?
SWill these only ever be offered for the MFG? I recently sold mine and got Slaw RH Rotors.
FI use instant trim (ffb friendly) for the cyclic as that was recommended.
Without springs and FFB wouldn't make sense since we are using FFB.
for the settings there isn't really a recommendation. Play around and use what you like.
also use TelemFFB, too
Without springs and FFB wouldn't make sense since we are using FFB.
for the settings there isn't really a recommendation. Play around and use what you like.
also use TelemFFB, too
AI think we're about to find out if the kit works with older mfgs
MJust been trying stuff out, instant trim is the way, I agree. The telemFFB effects are superb, I was using a CM3 Virpil base before which was very nice, but this is really good. Been using a Rhino in my jet sim pit for around 6 months now and really love it and was wondering how much better one would be in the Helo pit. Pleasantly surprised!
CI know it's pointless with the current state of what sims are exporting and such, but I'd really love to have ffb on the brake axes at some point. Steering airplanes with differential braking is easy in real life, but a PITA in the sims.
CBut any idea what the time fram is going to roughly be for people who go ahead and fill out the mfg preorder today?
PI've wondered how load cells would go on the toe brakes, I believe someone here did try it as a mod. If it could be done somewhat close to the racing sim brakes it might feel a lot better & be a bit more precise, I for one would def love some really nice feeling toe brakes closer to irl.
Cfor sure. I actually think it would be more of an improvement for me than the actual rudder axis. I don't fly helis at all, though.
TLoad cells or force sensing resistors are on my list for a mod someday. Need to build my FFB stick/rudders/collective first though.
MV2 and V3 are almost identical, the only thing that moved is one screw hole, but didn't Walmis say that this kit is gonna require some drilling anyways? Not sure how much V1 varies, but I imagine due to the fact that you are replacing the entire MFG drive and swapping in the VP Force drive, it should be possible, since they should have a damn near identical footprint
AI'm wondering about the tow brake sensor connectors
Cthing is, if there's no info coming back from the sim about when exactly the brakes are engaging or how much brake force is being applied in the sim, the ffb on the axes is kind of useless. It wouldn't be helpful beyond just making the brakes "feel" better.
NI see two problems here.
1.) Our calfs/feet are pretty strong. It would be nigh physically impossible to get motors and/or gear reduction on the brake axes that were strong enough to produce even remotely convincing results.
2.) Lack of telemetry. Given what I know about telemetry from the various sims I would put them in this order:
1.) Our calfs/feet are pretty strong. It would be nigh physically impossible to get motors and/or gear reduction on the brake axes that were strong enough to produce even remotely convincing results.
2.) Lack of telemetry. Given what I know about telemetry from the various sims I would put them in this order:
- X-Plane - probably has data you could use
- MSFS - maybe has enough data to use
- DCS - no way
- IL-2 - not a snowballs chance in hell