M36x2.0 - I will soon have an optional replacement/upgrade for that part machined out of aluminum.
M36x2.0 - I will soon have an optional replacement/upgrade for that part machined out of aluminum.
Vdo you think to offer also aluminum gimble or is it the Rhino's one strong enough?
NI would say not. Simply because there are so many other errors in that file. There are errors also relating to:
This warning early on, before any errors start seems suspect to me.. Probably a red herring, but a synax error in a mod that touches core functionality (I don't have a clue what this mod does) could certainly wreak havoc....
- Mod files
- Core textures
- Core sound files
- Sim Shaker export script
- Have you tried removing all mods?
- Have you tried renaming your save games folder so DCS creates a new one and test with that?
- Have you tried a slow repair?
This warning early on, before any errors start seems suspect to me.. Probably a red herring, but a synax error in a mod that touches core functionality (I don't have a clue what this mod does) could certainly wreak havoc....
SThanks for checking! For this particular log I did have mods installed, but I've had a similar looking crash with mods and with none. I've done dozens of slow repairs and have been deleting fxo/metashaders and the dcs temp file daily. Haven't tried the save games folder thing so I'll give that a shot next.
French pack is just a bunch of French ground vehicles. It looks like it does have an additional install step that I didn't do so I'll try that, too. Thanks!
https://www.google.com/url?sa=t&source=web&rct=j&opi=89978449&url=https://forum.dcs.world/topic/257437-frenchpack-v491-update-on-27042022/&ved=2ahUKEwjAjrCQtYWFAxXwEUQIHfPfDbsQFnoECBcQAQ&usg=AOvVaw3Elc8JGSpVyQbpKUnZe4d0
French pack is just a bunch of French ground vehicles. It looks like it does have an additional install step that I didn't do so I'll try that, too. Thanks!
https://www.google.com/url?sa=t&source=web&rct=j&opi=89978449&url=https://forum.dcs.world/topic/257437-frenchpack-v491-update-on-27042022/&ved=2ahUKEwjAjrCQtYWFAxXwEUQIHfPfDbsQFnoECBcQAQ&usg=AOvVaw3Elc8JGSpVyQbpKUnZe4d0
V:package: 
RHINO #0454 Has Shipped!
RHINO #0454 Has Shipped!
Csomeone else already asked, but are you running a quest vr headset? if so, have you tried launching dcs with vr off using the skatezilla launcher? there's a known bug right now if your oculus software updates that causes dcs to crash every time you try to launch in vr using a quest link.
SI've been using Virtual Desktop which doesn't seem to be affected by that bug. This crash is so frustrating because you might be able to fly for hours without a crash but then it happens twice in 10 minutes. I think I have it narrowed down to a RAM issue.
RTry using OvGME to save your VR graphic profile. Then when you want to fly VR, enable the "mod" and just open DCS per normal. Automatically opens in VR mode
RNo need for any virtual desktop, skatezilla oculus launcher or whatnot
CVirtual Desktop is the best (maybe only) workaround for a current oculus link issue. Without it quest headsets are broken until the next DCS update if their link software and headset firmware were allowed to update
CHey not sure why it's always so hard for me to find this link. Could someone send me the most recent TELEM FFB download link? The experimental new one please.
NIt's pinned in the TelemFFB knowledge base channel
https://discord.com/channels/965234441511383080/1093558100713279508
https://discord.com/channels/965234441511383080/1093558100713279508
N![Str][ker](https://cdn.discordapp.com/avatars/433653463520641041/4d1086cb661d4bc4da77091a7627e2b0.webp?size=40)
SQuestion for those who fly DCS helicopters with the Rhino. I have been flying around in the Blackhawk and was trying to figure out how to get the stick to remain in the trimmed position. I depress Force Trim while flying and the helicopter maintains train but the stick recenters. I am sure that I am missing something but can't seem to locate it. Is there a setting in the special settings for the Blackhawk and what about the FFB software for the Rhino? Thanks in advance!
![Str][ker](https://cdn.discordapp.com/avatars/433653463520641041/4d1086cb661d4bc4da77091a7627e2b0.webp?size=16)
PRun TelemFFB. Link is right above your message.
VSince I am not 100% sure about the process. Once I put in my preorder am I supposed to get an order form to fill out right away or not until my number comes up?
NI’ve never tried the Blackhawk mod…I’m not sure if it supports FFB or not. (Many community mods don’t) Others may know better. You may have to use the hardware force trim option in the configurator software.
TelemFFB won’t do anything here since the actual axis FFB is native to DCS.
TelemFFB won’t do anything here since the actual axis FFB is native to DCS.
SThanks! If I use an official module such as the Huey or Apache, this all should work I assume. I do use Telem FFB but as you mentioned, it doesn’t do anything for the trim. I will play around with the configurator software as well.
Nyeah, for the official modules, you should only need to configure the trim release binding (in dcs) and then make sure the special settings are correct (should be "default" or "instant" for any module).
SPerhaps a hard question but how long time is the waiting time for a new base today? 
SAt least 12 months
SIf u aint signed up yet do so if ur interested no need to wait in the end u get enough should-i-buy-thinking anyway
SAlready have one a friend wants one 
SHas anyone perhaps tried the Rhino with the Force Feedback plugin for Elite Dangerous?
SNice counterweight there, mate XD
Less bodged than mine
Less bodged than mine
RThe dining room chair is my favorite part
V:package: 
RHINO #0456 Has Shipped!
RHINO #0456 Has Shipped!V:package: RHINO #0457 Has Shipped!
RHINO #0457 Has Shipped!
AWhen your number comes up, or thereabouts.
SIt's easier to grill through plastic than steel, the only downside is that you needed a lot more of volume 
JReceived my Rhino last week and it is just stunning! Will start fine tuning now. Just one question: which part of the aircraft.cfg do i have to call TelemFFB profiles, to be correctly recognized?
Sa bit of a necro but thanks so much for sharing, I was just looking for this! my Rhino is on the way, trying to get all the configs prepared
RWhen setting up trim binds for the Apache, are you supposed to dual bind your force trim button between Telem and DCS, so they use the same button
AShouldn't need to. Dcs apache does force trim + ffb natively. Rhino's own force trim function is for sims/modules that don't do it correctly.
NI'll assume you mean for MSFS since thats the only one I know that has aircraft.cfg.
TelemFFB gets the name from simconnect, which I believe uses the "Title" that is in the aircraft.cfg file. Make sure you're using the WIP version of TelemFFB (pinned in #VPforce-TelemFFB). If you load an aircraft that does not have a profile, you will see a big purple button you can click to create a new profile: https://docs.google.com/document/d/1YL5DLkiTxlaNx_zKHEYSs25PjmGtQ6_WZDk58_SGt8Y/edit#heading=h.z3ihipnpx839
TelemFFB gets the name from simconnect, which I believe uses the "Title" that is in the aircraft.cfg file. Make sure you're using the WIP version of TelemFFB (pinned in #VPforce-TelemFFB). If you load an aircraft that does not have a profile, you will see a big purple button you can click to create a new profile: https://docs.google.com/document/d/1YL5DLkiTxlaNx_zKHEYSs25PjmGtQ6_WZDk58_SGt8Y/edit#heading=h.z3ihipnpx839
NThere's no trim button setting in TelemFFB for DCS since that is handled natively by the sim. As Adsforce pointed out, the hardware trim in configurator is meant for use with sims that don't have such functionality and/or aren't handled by TelemFFB
JThanks a lot! Haven't been using the WIP version before - makes things much more comfortable to adjust! Is there any way to find specific values for the Trim Gain Physical setting for individual aircraft types?
SRan memtest86 and it was indeed a RAM issue. Thanks for looking at that log!
DYes and it works!
You just have to manually setup the effects with his code. I wanted to add something to merge this to the telemffb but im not a dev for Elite Dangerous.
You just have to manually setup the effects with his code. I wanted to add something to merge this to the telemffb but im not a dev for Elite Dangerous.
Ngood find! was it failing hardware or a bad memory OC?
SNo OC applied for this test, so I'm thinking failing hardware. I suppose I need to narrow it down to a known good stick and test every slot to make sure I don't have a motherboard problem.
SSo neat! And thanks for your posts here about it. Do you happen to still have your file where you have set up effects?
RFFBeast just popped onto my radar. Thoughts?
RLooking at the spec list, the main things that stuck out to me was a higher peak torque, by quite a bit. But more expensive as well, starting at 900 EU
FRhino already feels like wrestling. no need for more. 
V"Forcefeed Beast"? that sounds like a farm thing
BI'm sure someone is going to keep making beefier and beefier units until someone literally breaks and arm.
RConsidering my 3rd most flown module is the bf109, and it was notorious for requiring excess of 60lbs of pull lol
Fsounds like a workout
Nsounds like you'd need a concrete subfloor and 1/2" lag bolts to secure the damn thing to the ground. Maybe when Gorilla Wrestling 2025 comes out and I want my arms ripped of "for realism".. I'll consider needing those forces.