Is there a command on discord to skip 487 places in line? No reason.
Is there a command on discord to skip 487 places in line?
No reason.
No reason.
A487 orders of Rhino on the wall, 487 orders of Rhino
Walmis builds one sends it away, 486 orders of Rhino on the wall
Walmis builds one sends it away, 486 orders of Rhino on the wall
.just start practicing stalking the mailman . So you can intercept him as soon as he leave the facility and collect you rhino right away.
Nintercept enemy aircraft 
intercept Fedex employees
intercept Fedex employees
SThat's gonna be my day tomorrow
FIts called DIY Join us
H@walmis I encountered the following issue with VP control software. To increase the centering precision I steepend the spring force curve around the middle position. which worked well. However, whenever TelemFFB loads this profile, the curve gets messed up (basically it is deleted beyond the first custom set point). Is this a TelemFFB problem or a VP control problem? (Or a me-problem?)
Wcan you send me the vpconf file?
HSure, I will try to reproduce the issue and send you the file. To elaborate a bit further - I created a "detent" around the middle position by implementing a small spike in the spring curve. Worked like a charm when testing dry, but once the game started and the profile was loaded, it "blocked" the pedals to one side and when looking at the custom curve in VP control, it was messed up. Reseting it solves the issue for the session, but of course, the custom detent is gone. (I was using this for helicopters - the idea was to feel the middle position of the pedals, even though they are without spring forces otherwise)
NSounds like you confirmed the profile did not push correctly, which is wierd since pushing from TelemFFB should be the same as loading a profile using the import button in configurator...
But.. don't forget that TelemFFB by default sets the spring to 0 with an override (which will also override any "sticky" you have in configurator). So unless you set the pedal spring mode to "Static" and set the gain in TelemFFB, you will never feel any spring.
But.. don't forget that TelemFFB by default sets the spring to 0 with an override (which will also override any "sticky" you have in configurator). So unless you set the pedal spring mode to "Static" and set the gain in TelemFFB, you will never feel any spring.
HI know. The issue was, that the pedals didn't went limb when it happened, but stiff (only on one side) and either way it shouldn't alter the gain curve in the vpconf, no? I assume the issue occured due to my messing with the curve, but it's beyond my capabilities to pinpoint the reason. Probably some "division by zero" problem, I created.... 
D@walmis just an FYI
Awell that is quite hazardous to your wallet
DShould I report the MFG kit pre-order as well?
B@walmis I was at the FSExpo in Las Vegas (a.k.a. Sin City) over the weekend. Virpil has a new grip that I'm quite excited about -- the FLNKR. There's nothing on the web about it yet that I can find, but it is part of a new "Expert Series" product line. Its body and trigger are metal, and it has a new hat design. One of my peeves about the Alpha and Alpha Prime Virpil grips that I had, but sold, is that I found it very difficult to press down on a hat without also actuating one of the other switches on the hat (L/R/U/D). The new hat locks into its center when slightly pressed down, which prevents that -- very clever. The grip feels great (it is pretty large though) and I was told that it's a replica of the grip that's in some Su jets.
I forgot to ask how much it will cost, but I'm not sure they would've told me. No release date yet.
I mention it only b/c I want to get it on your long-range A-A radar in terms of button/hat support on the Rhino. I will be holding off on buying the grip until that support is in place... It's shown in the product catalog I got at the show. EDIT: I just found some images of some of the new products: https://imgur.com/a/virpil-fsexpo-2024-hardware-pics-1Mq6as9
They also have a new Cadet grip that's coming out, and (not that it matters here) a new Expert Series "VMax Prime" throttle.
I forgot to ask how much it will cost, but I'm not sure they would've told me. No release date yet.
I mention it only b/c I want to get it on your long-range A-A radar in terms of button/hat support on the Rhino. I will be holding off on buying the grip until that support is in place... It's shown in the product catalog I got at the show. EDIT: I just found some images of some of the new products: https://imgur.com/a/virpil-fsexpo-2024-hardware-pics-1Mq6as9
They also have a new Cadet grip that's coming out, and (not that it matters here) a new Expert Series "VMax Prime" throttle.
WThanks for the heads up! Submitted a dispute to cisco umbrella.
NCisco Umbrella - "We scare your users so you don't have to!"
T487 orders of Rhino on the wall, 487 orders of Rhino
Walmis builds one sends it away, 495 orders of Rhino on the wall
Walmis builds one sends it away, 495 orders of Rhino on the wall
DI know I read it somewhere but cant find it atm. VKB sticks, I need the blackbox to read the stick buttons, I guess I also need a longer cable and the final question the connector? What exactly is needed?
FDid you order the vkb adapter connector from Walmis?
Nit looks like a more accurate representation of more up to date Su-57 cockpit mockups
NAs opposed to MCGU and T50 which were both more reflective of the late Su-35 design
Nwhich is rather funny since I'm pretty sure the T50 name is supposed to evoke references to the prototype Su-57
Nnicer hats too
NT50 hats look weird compared to MCGU and the real thing
DWill do when its time for the making of the actual order itself, forgot to do it on the preorder thingy. I am still quite a long way off but VKB is now in stock
Nthe cable is integrated into the adapter
Dwhat about the stick connector itself?
N? the adapter handles that, and the cable comes out of the adapter
Nplug it into the blackbox
DWasnt there something like I need the connector for Gunfighter 2\3?
N
Nas long as you get a rev.b grip if you buy the rev.b adapter, or a rev.c grip if you buy the rev.c adapter
NOH do you have NXT right now? then you'll have to convert that grip or buy one
DOh okay so I choose which adapter I need. And it goes from the adapter into the blackbox and from there into the PC.
I have none currently, I am using the worst financial decision stick ever (simple simpit)
I have none currently, I am using the worst financial decision stick ever (simple simpit)
Nyep, definitely get the rev.c one, it is way superior to rev.b
Npair with rev.C/GF4 grips
DOk, will do so! Honestly I cant wait to get rid of this POS stick I have atm...
Pwhat colour is that m8?
Nit is this color, it always comes across weird in pictures
https://www.cerakote.com/shop/cerakote-coating/H-349/aztec-teal
https://www.cerakote.com/shop/cerakote-coating/H-349/aztec-teal
Shop Cerakote AZTEC TEAL H-349. Find the coating that fits your application. Choose from a wide variety of coatings with specific attributes and specialties.
Poh did you diy cerakote the grip?
Ntook it to a gun shop
ONice, I've been interested in doing the same. Has it held up well to your grip? I.e. no erosion.
OMaybe I'll do it on my Mongoose as a test.
Nit's only been about a month and a bit. But since it's cerakote I have significantly more confidence in it than the factory e-coat that peels on older MCGUs
Ncan't say how it will be done on T50, as that's not metal and idk how well cerakote works on polymer and what prep is needed
Iall looks the same to me
Ndunno, virpil's old hats look a lil goofy
Nnew flankr grip looks amazing
