TI would guess your spring is too low. In effects tab change all spring to 100%. And set slider at 50% in settings tab
TYour current settings are giving less force than stock rhino.
FMy current settings give me way more force than the stock rhino actually but I'll try and see if setting max spring takes care of the issue.
FOk I did some testing. Setting the springs to 100% in both the effects tab and the setting tab fixes the issue. So you are right. Adaptive recentering is needing more spring strength to work correctly.
FLuckily with TelemFFB it doesn't need that much strength. It works perfectly with my original settings.
TAt 100% on spring your monster rhino is 1.7x the stock. You have limited it to 49% of that
T70% in effects tab and 70% setting slider multiply
FI'm haven't done any numbers on strength. Just telling you what I can feel through my arm 
FBut you are right. Spring strength fixes the issue. I'll remember that if I ever need to use it without TelemFFB running.
TYou have a shorter extension and are running slightly less than stock, so it might just feel stronger due to the extension
FIn the original rhino I had the spring gain dialed back to avoid overheating so your numbers are probably right.
FAnyway. Thanks for the help!
TNo problem, I would recommend keeping effects tabs at 100 and tuning via sliders but your preference may vary
Nremember that the settings here only apply when no game (or telemffb) have started their own spring effect. Those values only apply to the default spring effect that is started when using the base as "just a joystick".
TFor Monster Rhino: with 100% set for spring in effects tab, 59% on spring slider in settings tab will be equivalent to standard Rhino.
FNow I'm curious to see what percentage of spring strength starts to show the issue.
FAnyway. I'll probably leave it to 100% so it doesn't annoy me when I'm not using TelemFFB
TIf I remember correctly the grip you have is really heavy so you may have some negative inertia effects playing against you. More damping or some friction may help.
TYour damping is set very low
TAlso your sliders for inertia and friction aren’t doing anything because they are turned off in effects.
FJust for the fun of it I am making out all sliders one by one. Right now it's oscillating even with full spring and dampening effects.
FNevermind. Dampening helps getting rid of the issue.
FSo spring strength and dampening help.
FThese motors are so powerful. Since I'm using only a fraction of their power that was the main issue. Thanks again for the help!
TModified gain maps for damping, that make it change quickly near the center, have also caused oscillations for me.
TNo problem!
RWhich way on the map caused oscillation with reference to dampening?
TA steeper vertical slope near the center. Shallow angles were okay.
LHello everyone, hello to @walmis and @Number481
I received my Rhino base in June 2024 but with the death of my father-in-law, then solve all the problems and well I had not been able to play with my #Rhino.
I finally have time to play with it. I'm here to bother you to solve a problem! I drive on #Dcs /IL2 Bob and Mfs 2020!
My #rhino is well recognised by my Windows 11pro/Amd 7800x3D/64 ram ddr5/Mobo-Asus B650E-E ROG STRIX/ RTX 4090/Pimax Crystal Headset /MFG rudder. I launch the 2 Rhino apps (VPFORCE Configurator+Telem FFB) I use the #Rhino configuration (default rhino), I didn't change anything! Everything works very well apparently. My problem is that my Rhino, when I push/pull it towards me, everything works very well with a resistance in flight but: Laterally? My #rhino from left to right is all soft? I don't understand at all?
I received my Rhino base in June 2024 but with the death of my father-in-law, then solve all the problems and well I had not been able to play with my #Rhino.
I finally have time to play with it. I'm here to bother you to solve a problem! I drive on #Dcs /IL2 Bob and Mfs 2020!
My #rhino is well recognised by my Windows 11pro/Amd 7800x3D/64 ram ddr5/Mobo-Asus B650E-E ROG STRIX/ RTX 4090/Pimax Crystal Headset /MFG rudder. I launch the 2 Rhino apps (VPFORCE Configurator+Telem FFB) I use the #Rhino configuration (default rhino), I didn't change anything! Everything works very well apparently. My problem is that my Rhino, when I push/pull it towards me, everything works very well with a resistance in flight but: Laterally? My #rhino from left to right is all soft? I don't understand at all?
LMy #Rhino is connected to a Hub -USB 3.0 self-powered with an electrical outlet and connected to a USB-3.0 socket on my motherboard!
But nothing works!!
From left to right there is no force, or FFB?
Did I miss something?
I'll put you some screenshots of my settings, it's basic setting.
I leave as a noob #FFB with this #Rhino, my only joy FFB is a logitech G960 and à Microsoft #Sidewinder II ,there a long Time (1999).
Thank you in advance for your help and the delivery of my #Rhino last June.
But nothing works!!
From left to right there is no force, or FFB?
Did I miss something?
I'll put you some screenshots of my settings, it's basic setting.
I leave as a noob #FFB with this #Rhino, my only joy FFB is a logitech G960 and à Microsoft #Sidewinder II ,there a long Time (1999).
Thank you in advance for your help and the delivery of my #Rhino last June.
L
L
L
L
LThank you so much in advance .
LLaurent /
WThe X motor has shutdown due to instability, try reducing
To reset motors click Debug tab -> Reset Motors button
Both motors should have status OK at the bottom.
damper force LPF to 5-6Hz in the Expert settingsTo reset motors click Debug tab -> Reset Motors button
Both motors should have status OK at the bottom.
L@walmis
Hello .
Thank you so much
Hello .
Thank you so much
LI'll try right away with your advice
L
L@walmis
A small question :
-You have to create new profiles to adjust our Rhino ?
Because when I read the gamers who show their #Setting profile right here ,they have completely different settings from the #default config profile?
Thank you so much .
Laurent /
A small question :
-You have to create new profiles to adjust our Rhino ?
Because when I read the gamers who show their #Setting profile right here ,they have completely different settings from the #default config profile?
Thank you so much .
Laurent /
Si like that your stick returns smoothly at center. how did you achieve that?
DJust finished my build.
Unfortunately i get the following:
"[17:24:06.018] * USB Connected
[17:24:06.029] Motor 0 timeout
[17:24:06.029] Motor 1 timeout"
both motors appear offline.
They have power. I get see them both having green flashing led.
Unfortunately i get the following:
"[17:24:06.018] * USB Connected
[17:24:06.029] Motor 0 timeout
[17:24:06.029] Motor 1 timeout"
both motors appear offline.
They have power. I get see them both having green flashing led.
FMy guess is that applying some damper helps.
FBesides their power cables did you connect their data cables too?
Dyep
FA picture of the board may help. I'd try disconnecting and reconnecting the data cables in both the motors and board just to make sure they are connected correctly.
DTy. Give me some time to unscrew the front cover
DDid that and one of them worked. But the other one is still offline. seems that the connectors are a bit loose
DWell, it seems that the jst pins inside the connector had moved slightly outwards. i fixed the connector and now it works ok.