9Thank you
V:package: 
RHINO #0824 Has Shipped!
RHINO #0824 Has Shipped!V:package: 
RHINO #0822 Has Shipped!
RHINO #0822 Has Shipped!V:package: 
RHINO #0823 Has Shipped!
RHINO #0823 Has Shipped!
FHi guys, quick question: Does anybody use the Rhino with the WinWing F16EX with shaker kit? Is the Shaker somehow also supported by the platform or is it superfluous?
AI had the opportunity to test the Moza Mh16 Grip and would like to buy it. I love the Warthog stick but it wheighs 1.2 Kg. The Mh16 is only 570 gram made of Aluminum. Do you think it works out of the box with the Vpforce Controller like the Warthog as a Generic Grip?
TDon't think it is, I don't feel the need for it anyway.
KYou should know that MOZA isn't very popular around here since they stole VPforce source code for their FFB base software.
HThe weight of the Warthog grip isn’t an issue whatsoever though. I use it, and I‘m pretty sure lots of others, too. So if you worried that the weight would be an issue for the Rhino - you don’t need to.
AIt is an issue when you mount it with a long offset extension on a Motion Rig. Lot of work for the Motors, less agility difficult to recenter the stick with Motion active. I didn't now that they stole a source code. Only talking about the Stick, not the Base since I already build 3 Vpforce Bases. My question is, will the Stick that is compatible with a Thrusmaster Base, also work with the Vpforce controller? If it is forbidden to ask about Moza then sorry about that and forget my Question.
HI‘m using the Warthog on 20cm gooseneck. (No motion rig though)
I doubt that the motion rig would introduce any issue, but I can’t know of course.
I doubt that the motion rig would introduce any issue, but I can’t know of course.
AThat's nice for you but I had trouble with 1.2kg mounted on a 10 cm offset extension with 15 cm height. Force Trim was not funny with Motion active.
A@Kite thank's for that Information, I didn't now that. But other question, I see the last Pictures of your v2 throttle mod, how it's going? Are you done with it? Can't wait for that extra leverage 
Every day I see the last unmodded thing on my Rig 
Every day I see the last unmodded thing on my Rig 
RIf you meant the shaker kit as 'expantion body' for the joystick featured in https://boostedmedia.net/flight/winwing-16ex-metal-joystick-grip-with-shaker-kit-review/
, then it's working fine for me except button 41 and 42. I haven't tried every possible settings/axis though. I use it mostly for DCS. Ka-50 might be one of the module use most out of this expantion.
I agree the naming 'shaker kit' is confusing. I don't care internal vibration motor came with WW joystick niether, while much nicer FFB/telem-effect is going strong.
, then it's working fine for me except button 41 and 42. I haven't tried every possible settings/axis though. I use it mostly for DCS. Ka-50 might be one of the module use most out of this expantion.
I agree the naming 'shaker kit' is confusing. I don't care internal vibration motor came with WW joystick niether, while much nicer FFB/telem-effect is going strong.
Boosted MediaTom Ford
Detailed review of the WINWING 16EX Metal Joystick Grip with shaker kit by Pilot and Flight Sim expert.
KIt's going well, new prototype next week. @Alkman
TIf a stick works on a TM base it will work on the Rhino as generic grip. Read this thread under the functions section and there is some info on trying the moza on other bases. It sort of works but the hats are messed up. https://forum.dcs.world/topic/364801-moza-mh16-review/
AThank's for the Link !
RI still prefer a lighter grip, even on the Rhino. I've used both Realsimulator and Tianhang on a 10cm extension and this was the way to go for me
BThink my virpil grips is like 300gr. And i don't mind thst it isnt form factored to something I fly as i have nearly 40 buttons to bind.
SHello guys how long is approximately wait for the rhino? I will have budget for it the next year. But I am thinking about joyining the que now, as wait time is in months? Or not...?
MDoes anyone by any chance have a step or obj file for the 57BLF03 motor to use in 3D modelling program for a design I’m working on? Ta
S57BLF03.STEP393.65KB
MThanks
ZI use a 20cm gooseneck as my extension too, and started with your setup as a starting template. Do you use the "Low Hydraulic Pressure Effect" in TelemFFB, and if you do, how do you setup the damper/inertia/friction overrides?
HI don’t use neither of those effects, sorry. I set inertia friction and dampening only once per class (fixed wing or helicopter) in dedicated vp config profiles. And I haven’t tried the low hyd press effect yet.
V:package: 
RHINO #0826 Has Shipped!
RHINO #0826 Has Shipped!V:package: 
RHINO #0825 Has Shipped!
RHINO #0825 Has Shipped!
FDo I need to run both TelemFFB and FFB Configurator when playing DCS?
BNot necessarily the configurator but it is where you would change and tune core parts of the stick, don't really see any reason not to
HUsually I have VP config running (two instances for pedals and stick) while playing to tweak the profile if necessary.
BMight also be my paranoid behind, but I also like having usbtreeviewer running in admin mode as well.
Afedex'd again. "delivery not attempted"
MWhere and how is it best to adjust in the software to make the stick a little less responsive as you might do by adding a curve in the DCS axis settings on a normal joystick........?
V:package: RHINO #0828 Has Shipped!
RHINO #0828 Has Shipped!V:package: RHINO #0827 Has Shipped!
RHINO #0827 Has Shipped!
TI've been having issues with the VKB adapter, I've tried connecting it to the MK1 Blackbox and MK2 Blackbox, and flashed them accordingly, but I can't use the KG12 grip or the TM Warthog grip (w/VKB adapter)
TThe red "Stick" light on the blackbox keeps flashing.
And obviously I can't ask VKB for help here, the adapter is VPForce after all, so I was just curious what the procedure is here.
And obviously I can't ask VKB for help here, the adapter is VPForce after all, so I was just curious what the procedure is here.
TThis adapter specifically.
TThe blackbox just keeps blinking red which makes sense because it doesnt have a VKB base connected to it, but even with the KG12 firmware uploaded it wont detect the buttons either.
TSo how is it envisioned that this VKB adapter is gonna work?
HDoes it work with original GF base?
TAffirmative, and the Thrustmaster Warthog grip with VKB adapter also works on the original GF base.
I just got it working 2AM last night (which is why I was unable to update here, I was dead tired)
I just got it working 2AM last night (which is why I was unable to update here, I was dead tired)
THad to choose the right grip in this here window
TIt had nothing to do with VPForce, it's just fiddly VKB stuff as always
V:package: 
RHINO #0829 Has Shipped!
RHINO #0829 Has Shipped!
CWhat rev version is your adapter?
CWhat game are you playing and the stick shows up in the vkb config app?
TUnsure which rev version, I got the Rhino and adapter in 2023. Here's a screenshot of the BOT message, though it doesn't state which rev version the adapter is either:
TImportant to note I did get it working last night