Is it possible to weak the density of each asset from a group you scatter on a surface (on the same

Is it possible to weak the density of each asset from a group you scatter on a surface (on the same action, not 2 different scatter tools) ? for example I want very few trees, but lot of grass.

Xavier 𝐖𝐍𝐃𝐑𝐁𝐘 AlbertOP•1/9/25, 8:14 AM

also, the AI assistant says we can use a texture map as a mask for blended materials, but in the tool settings there is no such category.

KKinglaw_2023 You are right,After searching for "BAKE" I found the option for baking to static...

DanielFreden (Dash for UE5)•1/9/25, 8:25 AM

after baking it, and turning on nanite on the road, you need to search for "tesselation" in Dash, that is a shortcut to edit the init file. And then after running that action and restarting UE, you should be able to see and adjust the Displacement value in Material Edit or Blend Material and see displacement happening!

XXavier 𝐖𝐍𝐃𝐑𝐁𝐘 Albert Is it possible to weak the density of each asset from a group you scatter on a s...

DanielFreden (Dash for UE5)•1/9/25, 8:27 AM

This is coming in Dash 1.8.5 as we are adding a table feature into some of the tools, with that you can add in several meshes to Surface Scatter and then adjust if there should be more of Mesh 1 compared to Mesh 2 for example !

Xavier 𝐖𝐍𝐃𝐑𝐁𝐘 AlbertOP•1/9/25, 8:28 AM

Is it possible to vertex paint a nanite mesh ? The AI Says so but it doesn't seem to work :sprite_jawdrop:

XXavier 𝐖𝐍𝐃𝐑𝐁𝐘 Albert also, the AI assistant says we can use a texture map as a mask for blended mater...

DanielFreden (Dash for UE5)•1/9/25, 8:29 AM

ah yee it is making it up, there is no texture map feature in the blend tool

Sorry about that. You can use Vertex Colors though

XXavier 𝐖𝐍𝐃𝐑𝐁𝐘 Albert Is it possible to vertex paint a nanite mesh ? The AI Says so but it doesn't se...

DanielFreden (Dash for UE5)•1/9/25, 8:30 AM

Yee I think it is being dumb again, it don't work due to the nanite tech/logic :/

KKinglaw_2023 Question How can I get my scattered objects affect the Utra dynamic weather plug...

DanielFreden (Dash for UE5)•1/9/25, 8:32 AM

hmm good question, no experience with that plugin so can't help much. But maybe you can try to find some guide online on how to use that with PCG, our scatter results are the same as PCGs, they are both HISM, so that might be helpful.

Otherwise, you can always bake the Dash scatters down to individual static meshes or convert them to UE foliage painter, if that makes it easier for you

Luciano Daluz•1/9/25, 12:20 PM

So, I did the map using DASH, now I have to send the Project to a client, but they dont have DASH, what should I do?

LLuciano Daluz So, I did the map using DASH, now I have to send the Project to a client, but th...

DanielFreden (Dash for UE5)•1/9/25, 12:21 PM

Heyo!
Here is a FAQ post about just this: https://docs.polygonflow.io/getting-started/getting-started#sharing-the-level-with-someone-without-dash
Let me know if you have follow-up questions

FAQ | Dash Documentation

Luciano Daluz•1/9/25, 12:32 PM

Thanks @Daniel - COO so the client will get the project like "all static meshes project" or there will some warnings or so? Anyway, gonna download the trial and take and see how it looks.

LLuciano Daluz Thanks @Daniel - COO so the client will get the project like "all static meshes ...

DanielFreden (Dash for UE5)•1/9/25, 1:00 PM

No and yes, if you don't convert anything to static meshes, the things will be the same types as they are for you. But they will behave like static things yes. Besides our own custom procedural meshes (as mentioned in the docs), we only use native UE datatypes, so our scatters for example create HISMs, so the client will see the HISMs, but won't be able to adjust them through Dash, that's all

Maybe they will see some warnings, but nothing to worry about

Ye give the trial a spin, it is fully featured so you can experiment with it, and pass on questions here!

Luciano Daluz•1/9/25, 3:07 PM

In the road tool is there any way to include Street Curbs on the side of the roads? I tried to use the same curve I use to create the road but it doesnt push the road properties.

KKinglaw_2023 Never mind I found the Draw mesh option 😆

DanielFreden (Dash for UE5)•1/10/25, 9:06 AM

Nice! And also, you can use the Object Mask and the Inside feature to achieve the same thing!

stuz0r•1/10/25, 2:49 PM

I asked this in another channel, but wanted to ask it here. Is there a way to keyframe parameters for certain channels in the Dash scatter tool (or any tool)? For ex. the radial scatter, I'd like to keyframe the X rotation so that each of the scattered objects rotates independently. You can do this by sliding the slider in the Dash toolbar, but I can't seem to find a way to actually keyframe those in the UE sequencer. Appreciate any help!

Sstuz0r I asked this in another channel, but wanted to ask it here. Is there a way to ke...

DanielFreden (Dash for UE5)•1/10/25, 2:54 PM

Heya, sadly you can't

It is something we tried to fix before, but it turned out it was really really complex, so had to pause that idea for the time being

stuz0r•1/10/25, 2:55 PM

Ah! That's totally okay. Was just curious and thought I was maybe missing something. Man... that would be a huuuge game changer as it would take over some of the mograph tools that are in C4D.

stuz0r•1/10/25, 2:55 PM

Thanks for the response though!

Sstuz0r Ah! That's totally okay. Was just curious and thought I was maybe missing someth...

DanielFreden (Dash for UE5)•1/10/25, 2:57 PM

I agree! It is one of our most asked questions so many people are interested

Too small team and too many important things to do

DDanielFreden (Dash for UE5)I agree! It is one of our most asked questions so many people are interested 😁 ...

stuz0r•1/10/25, 3:12 PM

Understandable!

Sstuz0r Thanks for the response though!

arabinowitz•1/10/25, 4:12 PM

Would be cool to be able to grow vines and stuff like that too, but I understand how hard it is to make this kind of thing keyframeable in Unreal.

arabinowitz•1/10/25, 4:13 PM

Question: do path scatter objects have collisions enabled, so that other actors that have physics react to them (bounce...etc.)?

arabinowitz•1/10/25, 8:15 PM

having some weirdness where the terrain doesn't update until I deselect it.

Luciano Daluz•1/12/25, 9:26 PM

Any chance we have acess to the road mesh to make some changes?

AAndrea Pensieri I am having a small gap between the terrain and the road I created, I have arlea...

Luciano Daluz•1/12/25, 10:16 PM

Im on the same boat.

Ddewpoint Redownloaded Dash today 🙂 So excited! It's been a little while!

DanielFreden (Dash for UE5)•1/13/25, 9:48 AM

Welcome back! Probably a few changes since you used it last then, let me know if you need any help!

AAndrea Pensieri In the content menu there is the quixel megascan option to get assets from that ...

DanielFreden (Dash for UE5)•1/13/25, 9:51 AM

In the Quixel Megascans view in our Content Browser, you will see assets you have downloaded from the Bridge Plugin. If you haven't downloaded any, I don't think it is possible any more. But if you do have stuff downloaded, you may need to check your path settings, more info here: https://docs.polygonflow.io/getting-started/user-interface/content-browser/megascans

We are working on a FAB integration so you can see and use your megascans assets from FAB

Megascans | Dash Documentation

LLuciano Daluz Any chance we have acess to the road mesh to make some changes?

DanielFreden (Dash for UE5)•1/13/25, 10:30 AM

What do you mean exactly?
If you bake it to a static mesh you will find in the the project Content Drawer and can adjust it. But the procedural mesh from our Road tool is being produced from our code

tmaintv•1/13/25, 11:23 AM

Hey guys, I need some info on licensing for a studio. I run my freelance license and on most project been fine running on my own system. However I am getting asked to work on more projects with studios with walled networks that don’t allow any internet so would need a different license. Have you got a model that for these scenarios I can share pricing for

Retro•1/13/25, 2:49 PM

Dash is causing my Unreal engine Project to fail on Launch. Is there a solution to this?

Andrei Ivanescu•1/14/25, 5:10 PM

is there a way to bake this surface scatter in one single object with instanced meshes inside? When I hit "bake", it creates a ton of these single meshes, it would be much nicer to just ditch the parametrization and just have a HISM actor with thousands of instances, kind of like when you bake a PCG. Is that possible?

AAndrei Ivanescu is there a way to bake this surface scatter in one single object with instanced ...

Adnan Chaumette•1/15/25, 5:31 AM

You could delete the tool (from the panel's dots menu on the to right) and basically have a non-editable HISM, which is what the tool outputs by default

AAdnan Chaumette You could delete the tool (*from the panel's dots menu on the to right*) and bas...

Andrei Ivanescu•1/15/25, 8:51 AM

oh, since you put it that way, i guess as long as I don't try to edit it, there's no computational strain, then, right? I wasn't sure how it works (the problem with this specific one is that i've used the whole landscape to generate on, then masked with proximity to a bunch of curves - so density was up at 5 - so i wanted to get rid of the computational evidence of my ham-handedness :)) now i realize i could've just used a ghost plane to spawn these, then project onto the landscape inside the tool )

AAndrei Ivanescu oh, since you put it that way, i guess as long as I don't try to edit it, there'...

Adnan Chaumette•1/15/25, 7:31 PM

yeah there's no compute process on the object unless it changes. The change does include subtle things like transform updates and so on though, but even then you can just select the Freeze option in the tool's menu, and that should be it. You can unfreeze it later if you want, the tool won't have any compute cost until then.

Ddefinitely_Raven Hello. I have an issue with ending of Bridge and existing of FAB. How can I down...

DanielFreden (Dash for UE5)•1/16/25, 1:01 PM

Hey

Yee it seems right now you can only use already downloaded assets from Bridge, and not download new ones. Regarding FAB, we will ship an integration in Dash 1.8.5 which we are working to push as soon as possible!
If you want, you could grab a beta of Dash 1.8.5 right now: https://docs.polygonflow.io/advanced/release-notes/dash-1.8.5

Dash 1.8.5 (Beta) | Dash Documentation

Luciano Daluz•1/16/25, 5:54 PM

Question: I created this road yesterday, and today it is "flying" like this:

Luciano Daluz•1/16/25, 5:56 PM

I want to edit it, but how do I edit something alread created? If I select the mesh and go to edit nothing happens, If I go to "Create Road" nothing happens...

Luciano Daluz•1/16/25, 6:03 PM

Actually the same goes to everything created in Dash, how can I come back and edit it? Whatever Dash tool I select in the outliner, doesnt make any difference to Dash Edit, it always show "Road"...

Is it possible to weak the density of each asset from a group you scatter on a surface (on the same

Similar Threads

Similar Threads

Similar Threads