Play with the natural dampening compensation value. Increase it and it should relieve the dampening

Play with the natural dampening compensation value. Increase it and it should relieve the dampening you are feeling. If you increase it too far it will act like it is amplifying your inputs. You’ll find a value that makes it feel pretty free floating.

NNumber481 Play with the natural dampening compensation value. Increase it and it should r...

exil35•1/19/25, 5:43 PM

Thanks. I already tried that as well with no effect. It's like all the settings i do in VPForce Configurator are dead somehow. Although, it's recognizing the postion.

smitty•1/19/25, 5:46 PM

configurator screenshot? my first guess also was natural damping

smitty•1/19/25, 5:47 PM

effects, settings and debug tabs

Ssmitty configurator screenshot? my first guess also was natural damping

exil35•1/19/25, 5:55 PM

Here you go! And thanks for the help!

smitty•1/19/25, 5:57 PM

wow you really have nothing turned on

smitty•1/19/25, 5:57 PM

i see a little bit of identifier "joystick" in the bottom

smitty•1/19/25, 5:58 PM

have right device selected?

exil35•1/19/25, 5:59 PM

Yeah, it's named joystick. But i didn't connect the Rhino base (stick) for testing purposes.

smitty•1/19/25, 6:01 PM

maybe with master & spring at 0, natural damping can't do its thing. put those sliders to 100 save & store

smitty•1/19/25, 6:03 PM

is this a 57 or 86 motor

exil35•1/19/25, 6:03 PM

Yeah, already tried that. Sadly without any effect.
It's a 86.

smitty•1/19/25, 6:04 PM

and you said with belt removed its mechanically happy?

exil35•1/19/25, 6:04 PM

Stangely it doesn't have a device firmware. Don't know if that's okay...(i changed the name to "pedals" by the way)

smitty•1/19/25, 6:05 PM

hmm that might do it

Ssmitty and you said with belt removed its mechanically happy?

exil35•1/19/25, 6:05 PM

Yeah, without the belt they are moving freely.

smitty•1/19/25, 6:05 PM

i'd try to get that FW set before doing anything else

exil35•1/19/25, 6:06 PM

But i can't update the firmware somehow. But i remeber that i did that previously.

exil35•1/19/25, 6:07 PM

Nevermind...was the browser. With edge, it detects the FW.

smitty•1/19/25, 6:07 PM

ah ok good

exil35•1/19/25, 6:08 PM

NOW it's working!

smitty•1/19/25, 6:08 PM

try also turning on a low spring in effects

smitty•1/19/25, 6:08 PM

lol what changed

exil35•1/19/25, 6:09 PM

Don't know what happened. After i connected with EDGE browser, it's fine. But natural spring dampening works now.

smitty•1/19/25, 6:10 PM

nice! btw here are my pedal settings (my cable setup didnt need any natural damping so ignore that)

exil35•1/19/25, 6:14 PM

Nice! That feels solid as a baseline! Thanks so much for helping out!

CCaptainNel when im not running ingame, if i move the stick vigorously, i get this fault and...

.Eagle.•1/19/25, 8:54 PM

I been having the same issue for an month and half , also unable to find solution. In my case is similar to yours, only the X axis. Whenever multiple forces or effect are apply (per example an stall) the X axis fails totally , leaving me only the Y axis enable . Once reset by turning it on and off quickly it then goes fully hard to the left , like if the motor is applying full force to the left side. If you find an solution , pls let me know .

..Eagle.I been having the same issue for an month and half , also unable to find solutio...

CaptainNel•1/19/25, 10:31 PM

No motors fail in game, the stick is butter smooth except this feeling that it’s slipping under tension every now and then, which it isn’t as I’ve checked. However out of the game, with just the config loaded up, I have this issue when I move the stick vigorously. Not entirely sure what causes it but I’d like to fix the slip feeling more than this issue as this doesn’t affect me in game. Unless the issue are linked, maybe a duff motor or board or something ¯\_(ツ)_/¯

TrigaNZ•1/20/25, 3:31 AM

If the axis settings in DCS don’t effect a rhino product, how do I reduce the sensitivity of my rudder pedals? I’m darting all over the place trying to takeoff in the A10C. Cheers.

TTrigaNZ If the axis settings in DCS don’t effect a rhino product, how do I reduce the se...

Number481OP•1/20/25, 3:54 AM

The axis settings (curve and saturation) do affect the rhino.. just in a negative way. There's no correlation in the game between the axis scaling and the FFB output so when you enable a curve or saturation setting, the "axis position" and "ffb position" are out of sync.

Now, that said, DCS doesn't support FFB rudders natively and the FFB is handled by TelemFFB. You might actually get away with setting a saturation in the axis settings in DCS. I haven't tried it but I think it should work OK.

The alternative would be to set up a configurator proifle and manually edit the calibrated range max and min values. For example, if your calibrated range is 1275 to 3003, simply subtract/add an equal amount from both ends. 1075 and 3203 as an example. This will cause the full physical deflection of the axis to only amount to a partial excursion in the game , which is exactly what the saturation does for reducing sensitivity.

NNumber481 The axis settings (curve and saturation) **do** affect the rhino.. just in a neg...

TrigaNZ•1/20/25, 4:59 AM

Excellent, thank you, I'll try that. Cheers.

NNumber481 The axis settings (curve and saturation) **do** affect the rhino.. just in a neg...

TrigaNZ•1/20/25, 6:58 AM

So, changing the axis is DCS did literally nothing, but I think your other option helped a bit, will need to try with a much bigger +/- to test.

Number481OP•1/20/25, 1:15 PM

Ahh, yeah. For pedals if you have the TelemFFB pedal trimming feature enabled I can see that behavior. When that is enabled we actually override the axis position by sending it via the API (so that we can control the actual axis position when the pedals move in response to "trim".

In that case, yeah, the axis settings in DCS (even including inversion) will do nothing.

I'm curious though.. I'm not some sort of super pilot but I never found the A10 to be particularly twitchy on the ground, even without disabling nosewheel steering at 70Kt as per the takeoff procedure. My modded ACE pedals do have a fairly large range of motion though (same as standard ACE).

Shamansky•1/20/25, 5:57 PM

Is your Configurator v1.0.17b2 loading settings from device's memory on application start, my doesn't? Is Configurator's functions of Load Settings and Revert redundant? Does exactly the same thing or is there something I don't know about?

SShamansky Is your Configurator v1.0.17b2 loading settings from device's memory on applicat...

Number481OP•1/20/25, 6:28 PM

"revert" will load the "running config" from the device into the configurator settings
"load" will load the "saved config" from the device into the configurator settings.

Running/saved config could be different if you made a modification and hit Apply rather than Store. This will change the running config, but will not save it to flash.

NNumber481 Ahh, yeah. For pedals if you have the TelemFFB pedal trimming feature enabled I...

TrigaNZ•1/20/25, 8:09 PM

The A10 is an outlier for me, most other modules and MSFS are pretty good. Perhaps my Slaw range of motion is different. Will TelemFFB/Configurator ever have an axis scaling feature do you think?

FEVER 1-1 | FZG_Immel•1/20/25, 11:10 PM

I guys, I recently plugged my Rhino back because the other ffb base I was using has a cable issue. Like the first time I used the Rhino a year ago or so, most my DX buttons are ON, and I cannot click any... does anyone how to solve this ? thanks

FEVER 1-1 | FZG_Immel•1/20/25, 11:10 PM

look. the whole colomn is ON, but I cannot click any. Its the thrustmaster F-18 stick

FEVER 1-1 | FZG_Immel•1/20/25, 11:13 PM

thanks a lot for your support

FFEVER 1-1 | FZG_Immel look. the whole colomn is ON, but I cannot click any. Its the thrustmaster F-18 ...

walmis•1/21/25, 7:41 AM

Hi, can you do a quick test with the older v16 firmware? That will help me to isolate the issue. Don't forget to export your current settings.
You can downgrade using this link https://vpforcecontrols.com/usb/rhino/#force=ffb-rhino_v1.0.16.bin

TonyZ2525•1/21/25, 7:47 AM

@FEVER 1-1 | FZG_Immel is there a setting for grip type for f-18 thrustmaster cause you got it set for Generic Grip?

TonyZ2525•1/21/25, 7:49 AM

same happened to me with my Virpil Constellation Alpha

TonyZ2525•1/21/25, 7:50 AM

@walmis

FEVER 1-1 | FZG_Immel•1/21/25, 4:47 PM

i have downgraded to 1.0.16. same issue

FEVER 1-1 | FZG_Immel•1/21/25, 4:50 PM

I must specify that i own 2 different F-18 sticks and one brand new, and it happens with both of them. I also own the Virpil Warbrd and the VFX, and if I plug them, and set the proper stick type in VP Force configurator I am faced with the same exact problem

FEVER 1-1 | FZG_Immel•1/21/25, 4:50 PM

so i suspect it comes from the base

FEVER 1-1 | FZG_Immel•1/21/25, 4:51 PM

FEVER 1-1 | FZG_Immel•1/21/25, 4:52 PM

first time I received the VPforce month ago, i had the same issue, and for some reason after 1 hour of doing tries, it worked. but i dont really know what fixed it back then. Then I started using another FFb base to try. now I want to come back to the rhino and I am facing this again

walmis•1/21/25, 4:55 PM

Thanks for testing, and if you unplug the grip the buttons deactivate?

FEVER 1-1 | FZG_Immel•1/21/25, 4:57 PM

you mean unplugginh the grip from the base ? let me try

FEVER 1-1 | FZG_Immel•1/21/25, 4:57 PM

If I hot unplug the grip from the base the buttons stay ON/RED

Play with the natural dampening compensation value. Increase it and it should relieve the dampening

Similar Threads