1. Run the tesselation command in Dash 2. Select your plain etc, run nanite command in Dash (make s

1. Run the tesselation command in Dash
2. Select your plain etc, run nanite command in Dash (make sure to convert/bake a Dash mesh to static mesh first if you are using any Dash mesh)
3. Then you can adjust displacement for your MS assets

IIgor Is there a way to use Dash to overcome texture repetition, also known as tiling?

DanielFreden (Dash for UE5)OP•1/24/25, 9:12 AM

Hey @Igor & @jalol just wanted to let you know that we have included a way to break up texture repetition in the latest version of Dash now if you are still interested!

https://docs.polygonflow.io/advanced/release-notes/dash-1.8.5#texture-repetition-breakup

Dash 1.8.5 (Official) | Dash Documentation

der_urig•1/25/25, 7:40 AM

@Daniel - COO

I have two problems with the road tool, I'm struggeling with.
First is the width. Are this centimeters? If I compare it to a cube, both set at 12 meters (cube) and 1200 (centimeters? road), the road has twice the width. See Attachment 1.

Second problem: How can I adjust the UV so the texture stays in the middle of the road when I change the tiling? See attachments 2 & 3.

KKoke Hi @DanielFreden (Dash for UE5) !! Any chance that you can show us how you made ...

DanielFreden (Dash for UE5)OP•1/25/25, 3:27 PM

Heey!
Happy to hear you like that! It was actually a scene that @tamas_nagy did together with a Swedish train company

We have been planning on making some breakdown of the project, but have not gotten around to it yet, but fun hearing that there exists interest!

KKoke Sounds good! I’m working in a VAD project using UE5, and the scene is pretty sim...

DanielFreden (Dash for UE5)OP•1/26/25, 8:42 AM

Cool!
To give you some basic info, it is a lot of Surface Scatters and Path Scatters, both for the foliage but also for the railway. And mostly we used Megascans assets if I recall correctly

Here is a bit longer clip of the environment: https://x.com/polygonflow/status/1829569330725757235?t=xOhXxR7X6De_zvylOv_A2w&s=19

Polygonflow Dash (@polygonflow) on X

Finnish State Railways (VR) faced a challenge in their Swedish brand campaign: no VR-branded trains for filming.

Creative agency CROSBY leveraged the power of @UnrealEngine and DASH in creating a virtual train speeding through the Swedish landscape.

Download and try Dash for

•

8/30/24, 5:18 PM

MMadChadden How do you increase the size of the icons of the content browser?

DanielFreden (Dash for UE5)OP•1/26/25, 8:43 AM

Hold shift or ctrl and scroll with the mouse

EEslorex Hi, I have a question with the Dash's pricing. We're a Indie Company, under $25...

Daniel (Dash)•1/26/25, 1:20 PM

Hi @Eslorex Eslorex, freelance plan works for your case.

Please share any progress and we can promote screenshots.

KKoke Thank you so much @DanielFreden (Dash for UE5) for your response and the link! T...

DanielFreden (Dash for UE5)OP•1/27/25, 8:36 AM

Yee most likely you will find Dash easier to use than PCG, especially for this! But let me know if you need any help once you get started!

SSoulsAlive Hello, I bought a Dash subscription and I would love to know if there is any way...

DanielFreden (Dash for UE5)OP•1/27/25, 8:38 AM

Hey @SoulsAlive

Thanks for supporting us with grabbing a sub!
We have sadly not gotten around to looking into such things yet!

Perhaps at some point in the future

Hugo•1/27/25, 12:41 PM

Hey ! I have a bug, when I put a material with dash, my selected object disapear or is unselected... Any idea ? @DanielFreden (Dash for UE5)

https://www.youtube.com/watch?v=-9b1gn4RJE0

YouTubeHugooadr

dash bug

DDanielFreden (Dash for UE5)1. Run the tesselation command in Dash 2. Select your plain etc, run nanite com...

arabinowitz•1/27/25, 11:17 PM

How do I run the tesselation command. I could not get past step 1.

Aarabinowitz How do I run the tesselation command. I could not get past step 1.

DanielFreden (Dash for UE5)OP•1/28/25, 7:12 AM

You can search for tessellation in Dash and find the action "Enable Project Tessellation", once you click that, we will turn on tessellation for you. You just need to restart the engine.

Aadamsssssss Hello everyone, I have a question. Can I use dash in twinmotion?

DanielFreden (Dash for UE5)OP•1/28/25, 3:34 PM

Hey @adamsssssss

No you cannot sadly. It is in UE5 only

Hugo•1/28/25, 9:41 PM

@DanielFreden (Dash for UE5) Hey, I have a problem with some fab textures, idk why, when i import the material it's going on a vinyl material type... I don't understand why

KKinglaw_2023 Hi good people!! 🙂 UE 5.5.1 was crashing at startup so I uninstalled and reinst...

DanielFreden (Dash for UE5)OP•1/29/25, 8:45 AM

Hey, you would need to re-install Dash as well. Safest to first search for Uninstall Dash in Windows and run that, then you can install Dash 1.8.5 again

if needed: https://www.polygonflow.io/download-latest-dash

DDoru Bogdan Are you guys planning to improve the AI in terms of it's general knowledge on UE...

DanielFreden (Dash for UE5)OP•1/29/25, 8:48 AM

We will certainly try! But it is hard to say how much better we can make it without devoting a ton of time to it

SSam Smith hello, I'm trying to access my materials from the dash content browser but it do...

DanielFreden (Dash for UE5)OP•1/29/25, 10:17 AM

Hey! Yes, we only compute static meshes by default, though you can also compute materials. To do it, locate the specific folder that contains your materials in Dash's Content Browser folder view, then right-click on the folder, and select Include Materials. An icon will show up to indicate that the folder will now have its materials computed.

You are very welcome!

Xavier 𝐖𝐍𝐃𝐑𝐁𝐘 Albert•1/29/25, 5:57 PM

Hi Dear Dash team!

For some reason my curve after drawing it is impossible to move (you can see the move , rotate and scale tools are greyed out). I tried the AI search. I tried the unfreeze tool suggested but it does nothing. I am in a level instance editing.

Xavier 𝐖𝐍𝐃𝐑𝐁𝐘 Albert•1/29/25, 6:00 PM

PS : creating a curve and moving it in the master level works.

XXavier 𝐖𝐍𝐃𝐑𝐁𝐘 Albert Hi Dear Dash team! For some reason my curve after drawing it is impossible to ...

DanielFreden (Dash for UE5)OP•1/30/25, 9:54 AM

Hey! @Xavier �� Albert

Right now our tools are scene-specific, so they won't work with levelinstances sadly. I hope you can work around it!

Xavier 𝐖𝐍𝐃𝐑𝐁𝐘 Albert•1/30/25, 10:55 AM

Hi team !

How to get back to edit my path scatter ? it doesn't show the existing scatter properties in the pannel.

XXavier 𝐖𝐍𝐃𝐑𝐁𝐘 Albert Hi team ! How to get back to edit my path scatter ? it doesn't show the existi...

DanielFreden (Dash for UE5)OP•1/30/25, 11:01 AM

Hey

Here you have 2 possible problems (most likely 1 is the answer):
1. You are not looking at the correct Path Scatter in the Tools Panel. You can see the Pin icon is blue, which means that Path Scatter is pinned and therefore you don't see the Path Scatter you actually selected in the viewport. So you can try to un-pin the PS in the Tools Panel, and then de-select and then re-select your Scatter in your scene
2. Or this Path Scatter has lost its connections to the Curve and the rock you scattered. So if it is the right one displayed in the Tools Panel, you can see it says 0 at Curves and Scatter, so you need to assign the Curve and Scatter again. Then when you change the settings such as Density, you will see changes happening in the viewport

Xavier 𝐖𝐍𝐃𝐑𝐁𝐘 Albert•1/30/25, 11:03 AM

Thank you I will try.

Xavier 𝐖𝐍𝐃𝐑𝐁𝐘 Albert•1/30/25, 11:04 AM

Is it possible to enable collision with the path scatter ?

Xavier 𝐖𝐍𝐃𝐑𝐁𝐘 Albert•1/30/25, 11:04 AM

i'd like my rocks to not overlap each other

XXavier 𝐖𝐍𝐃𝐑𝐁𝐘 Albert Is it possible to enable collision with the path scatter ?

DanielFreden (Dash for UE5)OP•1/30/25, 11:05 AM

You can change the Density Mode to Fit Mode, that should give you more or less what you need

DDanielFreden (Dash for UE5)Hey 🙂 Here you have 2 possible problems (most likely 1 is the answer): 1. You a...

Xavier 𝐖𝐍𝐃𝐑𝐁𝐘 Albert•1/30/25, 2:53 PM

For some reason none of the solutions work. The 2nd solutioin is just creating a new scatter of objects and is not modifying the current one

XXavier 𝐖𝐍𝐃𝐑𝐁𝐘 Albert For some reason none of the solutions work. The 2nd solutioin is just creating a...

DanielFreden (Dash for UE5)OP•1/30/25, 3:11 PM

If you click here to open the list of active tools, are you able to find this specific Path Scatter?
If solution 1 above did not work, most likely the tool connection is broken, and the way to automatically open it in the Tools Panel by selecting is thus not working

If you are lucky, you can find the right path scatter in this list and then re-assign the curve and rocks to make it work again. If not, I am afraid you have to re-do it with a new Path Scatter

XXavier 𝐖𝐍𝐃𝐑𝐁𝐘 Albert For some reason none of the solutions work. The 2nd solutioin is just creating a...

DanielFreden (Dash for UE5)OP•1/30/25, 3:12 PM

And the most common issue that this happens (broken tool connection) is if one accidently deletes the curve or the original scattered object

Brudzilla•1/30/25, 9:07 PM

Hei! following the documentation and I wonder... the UVs are on the mesh we are suppose to scatter the texture on or? mmm i#m quite new to 3D but how to give textures UVs?

EDIT: ok the mesh that is the object surface of the scatter needs UVs i just tested apologies for slow thinking... BUT HOLY MOLY THIS TEXTURE MASKING IS JUST A BEAUTY MY GOD!

1. Run the tesselation command in Dash 2. Select your plain etc, run nanite command in Dash (make s

Similar Threads

Similar Threads

Similar Threads