From what I’ve heard that is working as intended. I don’t feel like I can ever get a level trim on t

From what I’ve heard that is working as intended. I don’t feel like I can ever get a level trim on that thing either. When it’s almost there even one tap of the button always overtrims

TTheAmazinGreat From what I’ve heard that is working as intended. I don’t feel like I can ever g...

Boggy•2/13/25, 6:03 PM

Exactly, it's really irritating. I've never flown a real airplane that was that hard to trim to fly level. The instrument trainer we had did behave like that and that was to make us better instrument pilots.

Fr4Ged•2/13/25, 6:25 PM

Yeah, same. Always fighting for trimming.
Maybe @Grover can give some insights how to set it up best?

TheAmazinGreatOP•2/13/25, 7:06 PM

I find it’s easiest to trim slightly nose down and then use some muscle memory to hold back pressure on the stick. Also, I like to use the altitude hold when possible, just be sure to bind master caution reset.

SkyPirate17•2/14/25, 1:19 AM

is the Rhino base physically compatible with SimFab DCS edition?

SkyPirate17•2/14/25, 1:25 AM

looking through past messages in this server I see reference to a custom mounting bracket, what issue does that solve (i.e. is the standard mounting bracket too tall or are the holes in the wrong locations, etc...)

TTheAmazinGreat I find it’s easiest to trim slightly nose down and then use some muscle memory t...

Reed•2/14/25, 2:48 AM

I do this too

Reed•2/14/25, 2:48 AM

But with helicopters

Jehly•2/14/25, 2:55 AM

Anyone's joystick just go limp in DCS? I'm getting no resistance whatsoever but I still get telemffb working

BBoggy Is it me or is the DCS F-4 a total pain to trim out nicely? It feels like the i...

asut•2/14/25, 4:26 AM

I find it easier to trim when the adaptive recentering is off.

VPforceBot•2/14/25, 7:42 AM

:package:

RHINO #0902 Has Shipped!

VPforceBot•2/14/25, 7:42 AM

:package:

RHINO #0903 Has Shipped!

BBoggy Exactly, it's really irritating. I've never flown a real airplane that was that...

Touch_Of_Legend•2/14/25, 10:51 AM

Really gives you another level of respect for the Blue Angels pilots who flew the F4 before the transition to F18’s.

Now of course they’ve transitioned again and they fly the Super’s.

But yeah formation flying in the Phantom….

Was seriously a next level skill.

Flying formation in a hornet is balls easy as compared.

Eagle1•2/14/25, 12:26 PM

Hi all, I just got my Rhino up and running, and everything works fine, but telemffb not working in DCS. Force feedback also enabled in DCS, and also tried the auto DCS setup in system setup. Anyone have suggestions? Also the Button/hat Source in Loopback not saving. Screenshot attached Thank you

Eagle1•2/14/25, 1:20 PM

Allso tried the pot 1/2 in Loopback source to be Rhino but no luck.

EEagle1 Hi all, I just got my Rhino up and running, and everything works fine, but telem...

Bob Bushman•2/14/25, 1:22 PM

Just checking: But stick will be practically dead until you are in a loaded and started aircraft.

And any changes to configurator needs to be applied and stored to stick.

Eagle1•2/14/25, 1:28 PM

Stick works in DCS but no telemffb. Nothing shows in settings/master instance when i am in aircraft. I use "store settings" everytime i change anything in Configurator.

Fr4Ged•2/14/25, 1:32 PM

Maybe the telemffb.lua is no bueno?

Eagle1•2/14/25, 1:33 PM

VPforceBot•2/14/25, 1:35 PM

:package:

RHINO #0905 Has Shipped!

VPforceBot•2/14/25, 1:35 PM

:package:

RHINO #0904 Has Shipped!

walmis•2/14/25, 1:35 PM

@Eagle1 attach your dcs.log file and export.lua so we can take a look

FFr4Ged Maybe the telemffb.lua is no bueno?

Eagle1•2/14/25, 1:36 PM

Is that file missing somewere?

Wwalmis @Eagle1 attach your dcs.log file and export.lua so we can take a look

Eagle1•2/14/25, 1:36 PM

Ok, just a moment

walmis•2/14/25, 1:53 PM

I don't see references to telemFFB in DCS log. Probably the module isn't loaded. Can you attach the export.lua from Saved Games directory.
Also let's move this to #

telemffb-user to not clobber up #

general

Eagle1•2/14/25, 1:54 PM

OK..Thank you

wolfman59#6013•2/14/25, 4:34 PM

Hello everyone, I would like to know, I have just tested my rhino on DCS, what should I set to feel, for example, the vibration of the aircraft when taxiing, the stall etc...

Wwolfman59#6013 Hello everyone, I would like to know, I have just tested my rhino on DCS, what s...

Fr4Ged•2/14/25, 5:11 PM

you need to run TelemFFB for those effects

FFr4Ged you need to run TelemFFB for those effects

wolfman59#6013•2/14/25, 5:13 PM

ah ok, I'll install it now.

Youtch•2/15/25, 1:18 PM

Anyone observing a different behavior since the last version? I noticed that the first time I get into a DCS module, it does not seem to always take the correct profile specified in TelemFFB. I have to open VB_Configurator and import and apply manually the profile, then it works ok, and then it seems to be able to switch profile correctly from one module to another, and work as well correctly for the rest of the day, each time I get into DCS. Does it have to do with how things are kept into the memory of the Rhino? Just wandering if it is my set-up or something that other people have been noticing since last update?

Youtch•2/15/25, 1:19 PM

Also, for me the RhinoLoopBack does not seem to memorize yet correctly previous joystick assigned, although I thought it was supposed to be fixed in last version

Old Prospector•2/15/25, 3:47 PM

Does the Rhino mount adapter connect to this Virpil thing

Old Prospector•2/15/25, 3:49 PM

All my stuff is put away at the moment so I can't check

YYoutch Anyone observing a different behavior since the last version? I noticed that the...

Youtch•2/15/25, 6:00 PM

I am keeping on having issue since the last update. In the middle of a DCS game, the Rhino stopped and told me that boot loader was detected. I started boot loader and it tells me to upgrade the firmware although the firmware was already up to date, I upgraded anyway. After, the update whatever profiles that I load in VPForce, the Spring force is null, although all this other parameters seems correct.

OOld Prospector Does the Rhino mount adapter connect to this Virpil thing

Jehly•2/15/25, 8:17 PM

I wouldn’t recommend just a clamp to the desk, but maybe someone who runs that can verify

Jehly•2/15/25, 8:17 PM

I use a chair mount

Old Prospector•2/15/25, 8:32 PM

Yea I'm going to use a floor mount

Old Prospector•2/15/25, 8:32 PM

Was just seeing what was possible I guess

Thorngeist•2/16/25, 5:05 PM

Should I use the "Override DCS Spring" effect in TelemFFB? I'm not getting any spring centering in DCS otherwise...

TThorngeist Should I use the "Override DCS Spring" effect in TelemFFB? I'm not getting any s...

walmis•2/16/25, 5:07 PM

DCS should create it's own spring effect. Can you post your dcs.log from saved games

Thorngeist•2/16/25, 5:08 PM

Log here, I think:

dcs.log208.24KB

walmis•2/16/25, 5:17 PM

Hmm, log looks good. Is you USB connection via HUB or direct connection to motherboard?

Thorngeist•2/16/25, 5:19 PM

Via powered HUB.

walmis•2/16/25, 5:21 PM

Try a direct connection to isolate a possible issue. There were some issues reported in the past with some hubs.

Thorngeist•2/16/25, 5:23 PM

Cool, trying now.

Wwalmis Try a direct connection to isolate a possible issue. There were some issues repo...

Thorngeist•2/16/25, 5:34 PM

This was 100% it, like night and day. All of the TelemFFB options were working, but no stick centering. Now I'm fighting the stick to roll, pitch, etc, which I can only assume is proper. Thank you!

Slavko Stanic•2/16/25, 11:48 PM

Anyone know what the wait time is right now? The FAQ is outdated

Bob Bushman•2/16/25, 11:57 PM

I've heard walmis say about two to three months.

Slavko Stanic•2/17/25, 12:04 AM

Oooh tempting

Slavko Stanic•2/17/25, 12:04 AM

Thanks

Bob Bushman•2/17/25, 12:40 AM

I have to remind myself I don't need a second one..

From what I’ve heard that is working as intended. I don’t feel like I can ever get a level trim on t

Similar Threads

Similar Threads

Similar Threads