You are not really supposed to use initialize, you're also setting the bit depths multiple times. So

You are not really supposed to use initialize, you're also setting the bit depths multiple times.
So not sure what the error is here, try cutting down the code to a minimal repo?

KKai You are not really supposed to use initialize, you're also setting the bit depth...

Cosmin Cretu•5/19/22, 10:33 AM

I tried leaving the most basic options for the window.
How would I get the window up without Initialize?
I need the window up first to in order to get a surface canvas for Skia to work, then trigger the render when needed, thus

IsEventDriven

IsEventDriven

@hanprogramer have you done this differently?

KaiOP•5/19/22, 10:55 AM

Using

.Run()

.Run()

CCosmin Cretu I tried leaving the most basic options for the window. How would I get the windo...

Hanprogramer•5/19/22, 12:05 PM

i just use the builtin ways. it also work with multi window with the WindowManager extension

Hanprogramer•5/19/22, 12:05 PM

when you call Run it Initialize automatically

Hanprogramer•5/19/22, 12:05 PM

you can also get the window up but hidden with the WindowOptions

Cosmin Cretu•5/19/22, 6:20 PM

@hanprogramer I managed with .Run() on windows
although @kaijellinghaus I still have the problem described above, I tried on a clean project with "Hello Window" example and I get the same thing

KaiOP•5/19/22, 6:37 PM

What exactly are you getting with that example? And what's your OS / drivers?

Cosmin Cretu•5/19/22, 8:53 PM

Ubuntu 20.04.4 LTS
NVIDIA dlloader X Driver 470.129.06

CCosmin Cretu the fun bit is that if I put a breakpoint right after window.Create and hover th...

Cosmin Cretu•5/19/22, 9:26 PM

I get this message

Cosmin Cretu•5/19/22, 9:59 PM

Ok, so basically the window is not being created as there's no handle

Redhacker2•5/19/22, 10:44 PM

Try sdl

CCosmin Cretu Ok, so basically the window is not being created as there's no handle

Redhacker2•5/19/22, 10:45 PM

Just try to force SDL and see if you get a window. I know we don't want to support SDL long-term but just do it temporarily

Cosmin Cretu•5/19/22, 10:48 PM

@redhacker2 I've just tried, with sdl it fails even earlier, at Window.Create

Redhacker2•5/19/22, 10:48 PM

Hmm odd

Lyris the Kitori•5/19/22, 10:49 PM

comment out your depth and stencil buffer settings, see if it still crashes

Cosmin Cretu•5/19/22, 10:51 PM

Cosmin Cretu•5/19/22, 10:52 PM

Still not working

Cosmin Cretu•5/19/22, 10:52 PM

I thought for a second that is the nvidia driver, I've re-installed it but still nothing

Redhacker2•5/19/22, 10:52 PM

Idk

Lyris the Kitori•5/19/22, 10:53 PM

one sec lemme get my launch options which force software rendering

Cosmin Cretu•5/19/22, 10:53 PM

It's really weird because it was working with the exact same way I was settings the window, then all the sudden it stopped

Lyris the Kitori•5/19/22, 10:54 PM

__GLX_VENDOR_LIBRARY_NAME=mesa LIBGL_ALWAYS_SOFTWARE=1 MESA_DEBUG=1

__GLX_VENDOR_LIBRARY_NAME=mesa LIBGL_ALWAYS_SOFTWARE=1 MESA_DEBUG=1

run your app through CLI with these environment variables set

Lyris the Kitori•5/19/22, 10:54 PM

er wait without 2 of those

Lyris the Kitori•5/19/22, 10:54 PM

those ones

Lyris the Kitori•5/19/22, 10:54 PM

should bypass nvidia

Cosmin Cretu•5/19/22, 10:57 PM

no freaking way, just dotnet run works now

Cosmin Cretu•5/19/22, 10:57 PM

I literally just tried it before I upgraded nvidia and didn't work

Cosmin Cretu•5/19/22, 11:02 PM

For some reason it started working, I think it might've actually been nvidia drivers

Cosmin Cretu•5/19/22, 11:02 PM

it's just that now I have a different problem with Skia, but that's a different story

Cosmin Cretu•5/19/22, 11:03 PM

That or it just got scared when you said to try CLI with those options

Cosmin Cretu•5/19/22, 11:03 PM

Thank you though!

Lyris the Kitori•5/19/22, 11:04 PM

Hanprogramer•5/20/22, 12:50 AM

I was having GlfwException with my project before, and it was fixed by changing my GPU from the integrated to dedicated one. Weird bug tbh

HHanprogramer I was having GlfwException with my project before, and it was fixed by changing ...

Cosmin Cretu•5/20/22, 8:40 AM

Personally, I think this is an issue, games & other apps like chrome that use opengl, they work with or without the dedicated gpu

KaiOP•5/20/22, 8:42 AM

I don't have an integrated GPU to test, but I'd be rather confident this is a driver issue

Ҡєʀ๓aℓıѕ•5/20/22, 10:00 AM

I'm not sure if this is a relevant question (it's a GL question), but I'm getting a GL error in this project I'm working on:

Program undefined behavior warning: The current GL state uses a sampler (0) that has depth comparisons enabled, with a texture object (9) with a depth format, by a shader that samples it with a non-shadow sampler. This will result in undefined behavior

Program undefined behavior warning: The current GL state uses a sampler (0) that has depth comparisons enabled, with a texture object (9) with a depth format, by a shader that samples it with a non-shadow sampler. This will result in undefined behavior

The relevant file is here: https://github.com/Kermalis/HybridRenderingEngine-CS/blob/main/Assets/Shaders/PBRClusteredShader.frag.glsl

If I change to sampler2DShadow, then the error disappears, but shadows don't actually work. The resources I've seen don't use sampler2DShadow so I'm confused, since this error can be "ignored" and shadows render properly. I didn't make this engine originally so I would like to understand this
It's the only GL error remaining. The original creator didn't have GL debugging enabled so they never knew about it

GitHub

HybridRenderingEngine-CS/PBRClusteredShader.frag.glsl at main · Ker...

Clustered Forward/Deferred renderer with Physically Based Shading, Image Based Lighting and a whole lot of OpenGL. - HybridRenderingEngine-CS/PBRClusteredShader.frag.glsl at main · Kermalis/Hybrid...

KaiOP•5/20/22, 10:01 AM

That's a quite detailed question, I doubt anyone here will know this specific scenario. Try the graphics discord from the pins

Ҡєʀ๓aℓıѕ•5/20/22, 10:05 AM

I'll ask there in the morning, it's 6am for me and I need to be up at 12

Vazde•5/21/22, 6:51 AM

Question about the Vulkan APIs. Many of the capability queries are performed by first asking how many things there are, and then stackallocing a span, and asking for the things. Silk.NET is rather 1:1, but does there happen to be helpers for those cases? Or any other helpers like the Chains?

Supine•5/21/22, 8:25 AM

How normalized way (0 to 1) of angles are called?

VVazde Question about the Vulkan APIs. Many of the capability queries are performed by ...

KaiOP•5/21/22, 8:32 AM

For the queries there isn't right now, because there is no way to return stackalloced memory, and we don't want performance to suffer.
There are chain helpers though, they are behind <RootStructure>. Chain<RootStructure>. Chain see https://github.com/dotnet/Silk.NET/tree/main/documentation%2Fstructure-chaining for details.

Vazde•5/21/22, 8:55 AM

Okay, thanks. I kinda remembered the same thing after asking. Of the chains I knew of, hence why I mentioned them. But does there happen to be any other helpers beside them? I don't have the need for them, but would be nice to be aware of what's available, while I'm learning about Vulkan in general.

KaiOP•5/21/22, 8:58 AM

I guess extensions are also neatly packaged into classes, other then that we don't have anything quite that high level.
Feel free to post ideas / problems / whatever here https://github.com/dotnet/Silk.NET/issues/887

GitHub

Tracking Issue for Bindings Generation & Improvements · Issue #887 ...

TODO We truly invite everyone to send us reports of any place where our bindings are not ideal. This issue will serve as a list of things we should fix in 3.0.

Vazde•5/21/22, 9:04 AM

I'll try if I get any ideas :) I wasn't really expecting there to be anything too high-level, but the chains were a welcome surprise, so wanted to make sure I hadn't missed anything else.

KaiOP•5/21/22, 9:43 AM

The chains were an amazing contribution, I'm hoping to build more things like them into 3.0

Lyris the Kitori•5/22/22, 5:53 PM

not directly silk related, but how would i get a DllImportDllImport asking for d3d11.dlld3d11.dll to pick up a native linux library version? ive tried naming the file libd3d11.dll.solibd3d11.dll.so d3d11.sod3d11.so libd3d11.solibd3d11.so d3d11.dlld3d11.dll and it always just says "failed to find native library 'd3d11.dll'

Lyris the Kitori•5/22/22, 5:53 PM

LLyris the Kitori not directly silk related, but how would i get a `DllImport` asking for `d3d11.d...

Perksey•5/22/22, 5:54 PM

just do d3d11d3d11

Perksey•5/22/22, 5:54 PM

as the import name

Lyris the Kitori•5/22/22, 5:54 PM

ill have to figure out how to compile vortice from source on linux then

You are not really supposed to use initialize, you're also setting the bit depths multiple times. So

Similar Threads