I have my spring force to 100 lol
I have my spring force to 100 lol
SAnd when I press trim my whole table jumps
SBecause my hand slams in the direction I was pulling or pushing
原YouTubecygan25
PL
Eagle dynamic potwierdził że jedenym z modułów będzie
Mi-24 HIND.
To krótkie proste wideo pokazuje, jak działa trymer w kokpicie
Mi-24.
Istnieją dwa sposoby tradycyjnego trymowania - CHINA HAT - przycisk 4 kierunkowy i przycisk elektromagnesu .
Jest także pozane działanie dzwigni skok- moc. Sprzęgło hydrauliczne uruchamia się za pomocą p...
Eagle dynamic potwierdził że jedenym z modułów będzie
Mi-24 HIND.
To krótkie proste wideo pokazuje, jak działa trymer w kokpicie
Mi-24.
Istnieją dwa sposoby tradycyjnego trymowania - CHINA HAT - przycisk 4 kierunkowy i przycisk elektromagnesu .
Jest także pozane działanie dzwigni skok- moc. Sprzęgło hydrauliczne uruchamia się za pomocą p...
原YouTubeRotorSimXP
In this tutorial we explain how the trim works in EC 135 V5 compared to the real helicopter. This includes the Force Trim Release Function (FTR) and the BEEP Trim. Official tutorial approved by rotorsim. Visit https://www.rotorsim.de
WARNING: Only for flight simulation! Not approved for use in a real helicopter!
For support, please use our for...
WARNING: Only for flight simulation! Not approved for use in a real helicopter!
For support, please use our for...
原lol dig out a ref for the magnitude of a cyclic from this very channel. It's for the UH-1H tho and it does seem to be lighter than a regular fixed wing📃general
原and some earlier discussion regarding springless stick, trimming, and SCAS in the apache etc. too📃general
JThat's a really clever implementation. Had a similar idea in mind but couldn't really get it sorted. If I was flying only helis I'd start on it asap, but I do swap between planes and helis a lot so will have to stick with the long term plan of FFB. 
WMan this ChatGPT thing is 
JYeah it's goddamn insane.
W
Wholy shit this is awesome
Tjust be cautios
Tsometimes its very confidently wrong too
Tyes you are correct, thanks to my 3am brain 
i shouldnt discord when in bed
i shouldnt discord when in bedTthat one was a compromise tho, in the real 135 it doesnt work like that, it works like in the hind video
Tthe latter part with the x52 i mean
Acan you ask the chatbot to double the frame rate in DCS?
W
Aso there really is no hope
A"Dear chatbot, how do I convince my wife that we really need a VPForce FFB joystick..?"
WThis chatbot could be a pretty good therapist lol
MHey the Ka-50 stick seems really far forward in the Sim pit compared to the location in VR
Did anybody find a way to fix that?
Did anybody find a way to fix that?
JI always felt like the Ka-50 stick in-game was weirdly in your chest, could just be caused by that?
T@walmis whats the lead time currently for a new order? roughly
Pbetween 90-120 days I think I saw last
Pbut likely get's quicker, he did move to a bigger facility not too long ago I believe
Palso totally worth the wait too, just got mine today, it'rs really solid, got some weight to it but not ott, I've also been really impressed with how easy it's been to set it up too
WSure, I will do that.
WNje, not really, I kinda thought that it simulated the inertia/friction etc of a real cyclic (and the assorted bits and bobs it is connected to) i.e. you can't whip a real cyclic back and forth so quickly and that DCS simulates that. Odd though that the behaviour changes with trimmer mode.
WNo experince here though, I've only flown IRL small prop planes with control rods directly connected to the control surfaces.
WBut this will not move the SCAS window or am I missunderstanding how you use this program...
S"remember that, ultimately, the decision to buy the vpforce joystick is up to your wife" 
SIts just ffb feel, the scas window will still work if you have trim bound
SI think that if they want to add some kind of damper they should do it internally in the apache. But I dont think this is that, it just doesnt make sence to limit the input speed for ffb sticks and no spring ones but then leave center spring joysticks perfectly responsive
SAnd its really bad anyways because if you move the stick in real life your brain expects the one in game to be in the same position.
SAnd this problem is not on any other module as far as im aware
SAlso scroll up a bit we have been talking about how the stick should move, there are videos and info
WGot the input loopback app running and talking with the Rhino 
PJust wanted to let ppl know that my first experiences using the RHINO base has been absolute positive! From my first impressions of the base itself, then the ease of initial set up, plus walmis has been active along with other discord members in helping answer questions in the support channel. I just want to let anyone know that may be on the fence about this product what type of experience I've had with it & it's creator! Thanks Walmis it's been a great experience!
WCheers! I'm humbled
SYeah I definitely need to loosen it up
VPlease provide me your email address you used for preordering, for example: !info email@domain.xyz
C!status
VHey @craptakularuk,
So the last Shipped RHINO is #0030 on 2022-12-08
Average waiting time from preorder to shipped is 85 days, median is 109 days, max is 156 days
28 Rhinos are shipped in total
So the last Shipped RHINO is #0030 on 2022-12-08
Average waiting time from preorder to shipped is 85 days, median is 109 days, max is 156 days
28 Rhinos are shipped in total
CI’m so excited to hopefully get one in the future but there are 198 orders before mine so likely to be 2024 I suspect 
CTrying to determine to go all in on vkb gunfighter or just get an EVO NXT while I wait for a rhino. If I go there EVO route I could get a better set of pedals like the MFG ones with dampener
MI got one last night, it's worth the wait!
My rudder pedals feel so lifeless in comparison now
My rudder pedals feel so lifeless in comparison now
CThat’s great. I don’t mind waiting. I’m just going to keep my x52 hotas going for as long as possible I think
BI have a Monstertech aluminum profile-based simpit, and am trying to figure out how I will mount a Rhino on it. I take it that it needs to be attached to something solid, like a plate on the floor, correct? (I.e. it's not heavy enough to be free-standing, correct?) This is my setup from a few months ago; my current one is a bit different (newer Virpil stick base, with a different mounting system) but this shows the interface between the base and simpit.
I prefer a side mounted one, not centered with the seat (which doesn't have a cutout).
BTW, where can I find dimensioned drawings of the Rhino?
I prefer a side mounted one, not centered with the seat (which doesn't have a cutout).
BTW, where can I find dimensioned drawings of the Rhino?
WWhy is the review section so bare? We have all of these guys getting their kit and going silent - what's up with that?
