I've got 200 mm curved extension
I've got 200 mm curved extension
SI already have the Brunner stick but I want to replace my CH pedals with FFB pedals. Does this project support DIY pedals with the current firmware and software?
SI have a machine shop, no issue making decent pedals
SFFB pedals would be amazing for helicopters and multi engine warbirds
SAnother question, has anyone made an adapter or firmware that takes the TM style handgrip signals and break them out into USB separate from the stick base?
AThe VPC one?
DSome grips like vkb and winwing need the vpforce adapter tho
Dvkb goes to the blackbox, make sure you have one of those
MThere are 2 unassigned axes on the board you could use for the toebrakes but there is not a 3rd axis for motor control you would need to use one of the kit's axes for that, though there has been some folks doing this as well as some other ff pedals someone made. Making them work in sims would req a bit of work but doable.
Not sure what you mean with the usb question, but the spi interface is on the board if you wanted a separate thing for that I'm pretty sure others exist
Not sure what you mean with the usb question, but the spi interface is on the board if you wanted a separate thing for that I'm pretty sure others exist
MBrunner is expensive, has limited mounting options, does not work with DirectInput without jumping through hoops using 3rd party software people struggle with to this day, even when it's working has connectivity caveats, the power cuts out if you hold full force for 20s or more, it runs hot. I've followed the Brunner threads on ED since it started a few years and it seems endless. A brunner owner @Sunshine recently found his way here to make a vpforce and can elaborate if he wants.
Meanwhile VPForce is plug and play with DirectInput, can output full force indefinitely since it has outrunner motors and active cooling, has a GUI to further augment profiles for planes/sims or make spring or damping profiles for sims that have nothing, a telemetry extraction app to enhance or replace shoddy feedback on sims that are lacking, costs way less, is available in kit form so crafty folk can make their own easily, has 2 unassigned axes that can be used for gain control, fans, game stuff
Meanwhile VPForce is plug and play with DirectInput, can output full force indefinitely since it has outrunner motors and active cooling, has a GUI to further augment profiles for planes/sims or make spring or damping profiles for sims that have nothing, a telemetry extraction app to enhance or replace shoddy feedback on sims that are lacking, costs way less, is available in kit form so crafty folk can make their own easily, has 2 unassigned axes that can be used for gain control, fans, game stuff
SIs that all it is, an SPI signal that comes out of the handgrip?
MYep, the vp board can interpret TM, Virpil, BaurBRD and any that use the same protocol natively, WinWing with an adapter but VKB req its own 'black box' you would need to route its wires to.
SThe toe brakes I could make a separate USB joystick, no biggie, it's the closed source software that I have no idea about with it working for rudder pedals
KI'm running the 200 mm Virpil extension on the rhino base and it's great!
SYes, I have to run a USB Arduino that connects to the Brunner via UDP. The Arduino does the conversion to Direct Input.
SIt works well for that but is an extra step and additional software being ran.
SBut the Brunner appears to be direct drive,no gear ratio to amplify the torque, so using extensions means the motors heat up quickly. If I don't fly and adjust trim continually to remove the force on the stick, it'll give out quick and it's a giant box between my thighs
SAnd it was 2x the price of a Rhino
RIt’s how my current franken sidewinder works. MMJOY2 on an Arduino Pro Micro talking to the TM stick shift registers.
SOk, so it's pretty straight forward then
RYea just search the web for MMJOY2 and dig into it.
SWith the Rhino DIY setup, I envision I could put all of it in the floorboard of my cockpit and use a proper length stick extension. Could even have a tandem cockpit where both sticks are driven by the same kit.
SI just built a button box that uses a similar project to MMJoy but uses a cheap STM32 Mcu.
SFreeJoy?
RDebolistis
RDon’t know if that talks shift regester
S
SI used a Debolistis shift register boards with the FreeJoy and STM32, works perfect
S
RI was going to say he also has a Board that breaks out the Pro Micro to the shift register pin header
RJust wire up a mini-din 5 pin female and plug it into the TM stick
SOk, I didn't realize it was that simple
SThat opens up every single Virpil stick to me
RYeup. Not positive on how it talks analogue through the Shift register, The Rhino board is already set up to read it out of the box
RIf you’re in the US, I have an extra Debolistis ProMicro to SPI break out board i can send you as i had to order 3 from OSH park.
SI still have 2 more 64 input boards I haven't soldered up yet
RIt’s this one, because a blue pill is overkill for buttons. https://oshpark.com/shared_projects/Bp6mCRsf
RWith the inland or amazon rando copies of the ProMicro it’s way cheaper for just buttons
RTheir even labeled in Thrustmaster wire color for extra lazy
SMy blue pills were super cheap
SAh I see.
RI get my pro micros for $9.99 at Microcenter. Cause I’m spoiled by being near one.
SThink I got a 5 pack of blue pills for 15$
RBut either works. Especially if you already have one
RWow!
RGood deal
SI like the FreeJoy project because it's still active and updated, MMjoy is now abandoned
RYea I’ll probably switch when I run out of pro micros. Or need faster sharper input
SMy blue pills are generic STM32's but still work
RSTM32, are super handy. I use them for real-time data in my race car.
RMuch more versatile than ATmega32s