TMight give the Blackhawk mod a go on DCS. Or do a trial of the Mi-8. I have been trying to learn to fly helicopter in Squad but the flight model is probably way off a real sim. Mostly was trying in Squad because I own it already and to see if I like flying helicopters. Don’t know if it’s just a bad flight model or I am bad pilot but probably it is both.
Hyou trade altitude for speed, exactly the same as in a fixed wing.
1Correct, now add collective and what happens?
HGo up a few lines and carefully read what I wrote about collective and cyclic.
Xif you never flown heli or FPV drone, it would be hard at start to get how it works
Xas soon as you get it, it's easy peasy, 360 no scope
AAnd then the helo kills you.
ABut yea, once you get the gist of basic helo controls, it's relatively straight-forward with practice
ASome are, of course, more temperamental than others.
X10,000 hours rule always works
HReally, the hardest part is hovering and deaccelerating into a hover. Cruise flying is as straight forward as it is in fixed wing. Speed and altitude share an energy budget. You can increase one for the expense of the other, but not both - unless you add power.
LI think you no longer want any curves to mess with the feel of the Apache now that you have a Rhino. It can be tricky especially when landing but curves (if you could use them) would only make it harder. You may want a ~10 cm extension though.
TTurning is giving me fits too, but probably just need more practice. What do you do with collective in turns?
HMaybe add a tiny bit, but as I said, same as with fixed wing. keep the ball centered with the pedals ("kick the ball") to avoid slip or skid.
HYou will be fine tuning the turn with the cyclic without noticing. But physics dictate that in order to keep your altitude in a turn, you either slow down (pull on the cyvlic) or add power.
1The 60 is my least favorite helo in dcs… the oh6 is pretty good for a mod. The Kiowa has the best fm but the Huey is really nice, it would be a good trial helo in my opinion!
TMaybe I’ll check out the OH6 mod also
HIt is repeated over and over, and I like the FM of the OH-58. But I still fail to see, why or where it is better than that of the Mi-8. Generally the FMs of DCS-Helicopters are very good. I'd say benchmark across any consumer sim. But I can't see what makes the OH-58 so special tbh.
H(unless one reduces the quality of a helicopter FM to the onset of VRS)
OAnecdotally, the Mi-8 seems to have a ton of power. If you are nearly clean, you can go from a gentle descent 1m off the ground to a rapid climb at the drop of a hat.
OBig difference compared to Mi-24, very noticeable landing.
1To be fair I haven’t flown the mi8….
RI do have a 10cm extension. I had a 15cm extension with the Virpil, but that steam is also much shorter. I find it's too twitchy for me right now on hovers and in transition than I am used to
HThe OH-58 is rather easy to fly (not necessarily unrealistic as I have heard), especially compared to the most popular helicopter module so far - the Apache. Perhaps this is where this judgement stems from.
HAnyway. Once you got a hang on flying he OH-6 - every other Helicopter flies in easy mode.....
1Yes the oh6 and me do not get along!
TI wish there was a lofi cockpit, hifi flight model helicopter option lol
TSimilar to Flaming Cliffs but for a helo
HEventually it clicked. The keyword for me was over-controlling. But I can't imagine flying it with a desktop spring loaded "peasant" joystick. (And it got a lot better with the second iteration of the FM)
HWell, the OH-6 is free and doesnt' need a base module to work (afaik). It is a hard start, for sure, but if you learn to fly that, you can fly everything.
1Agreed, you tame this thing the rest will be much easier!
AFlew the initial version a bit, but yea, it was twitchy.
I think I ended up increasing the sensitivity, and limiting the outer range to match the in-game stick range.
Worked pretty well, actually, and I applied the same thing to the Apache.
Works nicely against over-compensating inputs, actually.
I think I ended up increasing the sensitivity, and limiting the outer range to match the in-game stick range.
Worked pretty well, actually, and I applied the same thing to the Apache.
Works nicely against over-compensating inputs, actually.
1I’ve got the cm3 with a 200mm extension, it’s a fantastic setup but still excited to try the rhino!
HI had a similar setup befor the rhino. It works as well as it comes with non-ffb. But no comparison to the Rhino.
BI had the 1st gen t50 and warbrd gimbals from virpil, but getting the rhino is almost as much a jump in smoothnes and feel as when moving to those from my ch\saitek kit.
BAnd then you add all the FFB features and trim functions etc
1My concern was the rhino would be as smooth..
BIt's smoother.
1Oh wow that’s hard to believe because the cm3 with nyogel is pure butter!
HYeah, but still has springs,
1Not with the cm3
HYou can't properly force trim and force trim release without ffb.
1Well how I run it anyways
Hyeah, but then you have either a limb stick or a lot of friction/stiction.
BI barely touched the rhino, looked at my virpil gimbals and went "yup, done with them"
1This is what I’m looking forward to, with my current setup it’s just a dead stick, stays wherever I leave it but there absolutely no stiction
HThat's kind of impossible....
1How so?
HWell, anyhow, eventually you will see for yourself. I'll bet you'll love it.