DevHeads IoT Integration Server•15mo ago

Could be implemented in any tbh We were aiming with zynq but backed out due to financial constraints

Could be implemented in any tbh
We were aiming with zynq but backed out due to financial constraints

Mmelta101 Could be implemented in any tbh We were aiming with zynq but backed out due to f...

techielew•10/8/24, 5:31 PM

What did you end up deploying on? Qualcomm?

Ttechielew What did you end up deploying on? Qualcomm?

melta101OP•10/8/24, 5:31 PM

The SDR?
It was deployed on a zynq 7000

melta101OP•10/8/24, 5:31 PM

And a infinion PSOC 6

melta101OP•10/8/24, 5:32 PM

client's requirements

Mmelta101 The SDR? It was deployed on a zynq 7000

techielew•10/8/24, 5:32 PM

Oh I thought you said you backed out of Zynq bc of financial constraints; you meant you backed out of the project.

Ttechielew Oh I thought you said you backed out of Zynq bc of financial constraints; you me...

melta101OP•10/8/24, 5:33 PM

Oh
I think I may have given the misinformation
We backed out of buying the SCA compliant SW framework

melta101OP•10/8/24, 5:33 PM

The project was government funded so we can't just simply back out

Mmelta101 Oh I think I may have given the misinformation We backed out of buying the SCA ...

techielew•10/8/24, 5:49 PM

Oh got it

Umesh Lokhande•10/9/24, 7:41 AM

Hi @kristof-at-embeetle if you don't mind may I know from where you've got the membrane overlay printed on Embeetle's tiny scarab? Also, which software do you use for the design

kristof-at-embeetle•10/9/24, 10:33 AM

Hi @Umesh Lokhande ,
I used https://www.jrpanel.com/
They have a great online system to enter your files.

The Beetle Board is open source. You can find the files for the graphical overlay here:
https://github.com/Embeetle/tiny-scarab/tree/main/graphic_overlay

GitHub

tiny-scarab/graphic_overlay at main · Embeetle/tiny-scarab

Tiny beetle board based on the CH32V003 10-cent chip. - Embeetle/tiny-scarab

kristof-at-embeetle•10/9/24, 10:33 AM

I used inkscape for the drawing, then exported to pdf.

RRenuel Roberts when working with Zephyr OS for embedded systems, what do you find most benefici...

Boss lady•10/9/24, 10:42 AM

Zephyr OS has become a popular choice for embedded systems due to its real-time performance, modular architecture, extensive hardware support, and built-in security features. Designed for time-sensitive applications such as industrial automation and medical devices, Zephyr ensures that tasks are executed predictably, meeting strict timing requirements.

I prefer it because of its modular design allowing developers to tailor the OS to fit specific project needs, keeping it lightweight and efficient for resource-constrained environments. Zephyr also supports a wide range of hardware architectures like ARM, RISC-V, and x86, offering flexibility for multi-platform projects. Through its use of the Hardware Abstraction Layer (HAL) and device trees, it simplifies hardware configuration without code changes.

Also it takes security as a core feature, with integrated support for secure boot, trusted execution environments, and memory protection, making it a strong option for IoT and connected devices. Zephyr also includes cryptographic libraries and network security features, ensuring safe communication over networks.

If you would like to know more about zephyr you can check out the Zephyr Project GitHub repository and the Zephyr documentation. You can also access the Zephyr OS PDF guide for a comprehensive overview of its capabilities.

https://github.com/zephyrproject-rtos/zephyr
https://docs.zephyrproject.org/latest/index.html
https://docs.zephyrproject.org/latest/_downloads/zephyr_overview.pdf

GitHub

GitHub - zephyrproject-rtos/zephyr: Primary Git Repository for the ...

Primary Git Repository for the Zephyr Project. Zephyr is a new generation, scalable, optimized, secure RTOS for multiple hardware architectures. - zephyrproject-rtos/zephyr

Dtynin•10/9/24, 4:16 PM

Hey guys, what do you think about the future of Open-source contributions in embedded systems. Are corporate interests slowly undermining the true spirit of open-source contributions in embedded systems? Can big companies and the open-source community ever find common ground, or are we heading toward inevitable conflict over control and innovation? @Middleware & OS and @MCU, MPU & Firmware

DDtynin Hey guys, what do you think about the future of Open-source contributions in emb...

ke7c2mi•10/9/24, 4:21 PM

Flip that round - open source has over time filled more and more of the niche. Things were far more proprietary a decade ago.

DDtynin Hey guys, what do you think about the future of Open-source contributions in emb...

ChoRam•10/9/24, 4:22 PM

I want to know why this question now? Has anything happened in recent times?

barafael•10/9/24, 4:23 PM

I strongly believe and also weakly hope that open source software systems are and will be simply better in many metrics.

CChoRam I want to know why this question now? Has anything happened in recent times?

Dtynin•10/9/24, 4:37 PM

not per say tho...but I hope the future of open-source contribution in embedded system should be community driven as opposed by some folks that thinks otherwise tho

CChoRam I want to know why this question now? Has anything happened in recent times?

techielew•10/9/24, 5:01 PM

Watch what has happened/is happening/will happen with Zephyr

techielew•10/9/24, 5:02 PM

Linux Foundation dues aren’t cheap at membership levels that matter

Ttechielew Watch what has happened/is happening/will happen with Zephyr

ChoRam•10/9/24, 5:18 PM

Zephyr is FOSS right? Is it becoming closed source?

DDtynin not per say tho...but I hope the future of open-source contribution in embedded ...

Ming•10/9/24, 6:12 PM

Looking at things like the Linux Kernel....
The most commits to the kernel come from corporations (Microsoft is actually one of the biggest contributors to the Kernel!).
A lot of the kernel maintainers are employed by corporations.

However, none of that stops individuals from contributing their bits to the kernel.

I see it as a positive that enterprises can commit things that improve software for their use case and as is the spirit of open-source - everybody benefits.

If an enterprise tried to block commits to an open-source project, then with the 'cancel culture' the bad PR would be bad for their bottom line and so very quickly counter-productive.

CChoRam Zephyr is FOSS right? Is it becoming closed source?

Ming•10/9/24, 6:53 PM

Zephyr is run by the Linux Foundation so is not going closed source anytime soon!

Roshan Baig Mogal•10/9/24, 7:00 PM

Hi Community ! Myself Mogal Roshan Baig , done Bachelors in Computer Science and Engineering currently working to enhance my skills on embedded systems , and Iam very much interested in open source projects. Any help or suggestion would be appreciated. Iam totally beginner please suggest me some new opensource projects.
Thanks.

RRoshan Baig Mogal Hi Community ! Myself Mogal Roshan Baig , done Bachelors in Computer Science and...

Marvee Amasi•10/10/24, 6:32 AM

Hi Mogal, nice for you to join us

. Since you are starting out in embedded systems and want to get into open source projects, I will suggest that you look into some beginner friendly platforms like Arduino, ESP32, or STM32. They have active communities and plenty of projects to contribute to. You can explore open source repositories on GitHub related to IoT, robotics, or home automation great places to start

matthewflynn_•10/10/24, 8:30 AM

Hi there. I've been working as a .net dev and want to use the Iot.Devices.ImuIot.Devices.Imu library to calibrate and use a acceleormeter on a project I am building.

I have had issues with a bug using an MPU-6050MPU-6050. I went to buy another in case it was a dud and was sent a Adafruit TDK InvenSense ICM-20948 9-DoF IMU (MPU-9250 Upgrade) (STEMMA QT / Qwiic)Adafruit TDK InvenSense ICM-20948 9-DoF IMU (MPU-9250 Upgrade) (STEMMA QT / Qwiic) as they were out of stock.

I've tried writing my own class to get the data and calibrate but I my readings seem to really vary in the sample set on the Gyro side?

Does anyone know where I can find a details of the unit so I can make sure I'm reaidn ghte right data? (I can share my code if anyone wants to look).

Mmatthewflynn_Hi there. I've been working as a .net dev and want to use the `Iot.Devices.Imu` ...

Camila_99$$•10/10/24, 9:42 AM

Hi @matthewflynn_ welcome!
I’d be happy to take a look at your code to help pinpoint the calibration issues. For the ICM-20948, you might want to check the specific register map and data sheet to ensure you're reading the right values, as it differs a bit from the MPU-6050. Could be helpful to review your Gyro calibration routine too.

Mmatthewflynn_Hi there. I've been working as a .net dev and want to use the `Iot.Devices.Imu` ...

ZacckOsiemo•10/10/24, 10:38 AM

do you have a way to test on peek into what the hardware is doing, i.e an oscilloscope or a Logic analyser?

CCamila_99$$Hi @matthewflynn_ welcome! I’d be happy to take a look at your code to help pin...

matthewflynn_•10/10/24, 10:57 AM

Hi there thank you for taking the time - I added the code to post in code review - if you neeed anything else let me know

I've been working on it further and trying to stabalise the results but to no avail.

ZZacckOsiemo do you have a way to test on peek into what the hardware is doing, i.e an oscill...

matthewflynn_•10/10/24, 10:58 AM

I'm a bit of a newby to this so I'll happily be guided - its on a raspberry pi 2, so I can ssh in and get the data this way through apython script if you think that would potentially help?

MMarvee Amasi Hi Mogal, nice for you to join us 😊. Since you are starting out in embedded sy...

Roshan Baig Mogal•10/10/24, 1:27 PM

Thanks a lot for response ....

! I will checkout STM32 ,as I have STM32 kit. Do I need to search GitHub for projects or is there any section of projects in this server?
Thanks.

RRoshan Baig Mogal Thanks a lot for response ....🙂! I will checkout STM32 ,as I have STM32 kit. D...

Umesh Lokhande•10/10/24, 2:45 PM

Hi Roshan, may I know which stm32 kit you use I mean Nucleo or Discovery board? Will be happy to point you to the right resources. Feel free to check out the event section. Every week several activities are happening (here) with great learning opportunities. Best wishes!

R1Tap•10/10/24, 3:25 PM

anyone who is good at computer networks here
I need to setup a voip using microcontrollers
I'm using pjsip

ES-Tech•10/10/24, 3:40 PM

@R1Tap I am confident

UUmesh Lokhande Hi Roshan, may I know which stm32 kit you use I mean Nucleo or Discovery board? ...

Roshan Baig Mogal•10/10/24, 6:15 PM

Hi Umesh,
Thanks for reaching out ! It is Nucleo F446re.
Thanks!

RRoshan Baig Mogal Hi Umesh, Thanks for reaching out ! It is Nucleo F446re. Thanks!

Umesh Lokhande•10/11/24, 8:05 AM

Hi @Roshan Baig Mogal Great, these days in Engineering Hour covers wide topics like FreeRTOS, CMSIS-RTOS, etc. with STM32F4 Nucleo. Also, for beginners getting-started type videos incl. basic, adc, pwm, uart etc. I suggest to check the playlist https://www.youtube.com/watch?v=NnwE9EfFpls. Cheers!

asefmo•10/11/24, 10:37 AM

hi!

asefmo•10/11/24, 10:40 AM

Has someone some knowledge about Lorawan

Aasefmo Has someone some knowledge about Lorawan 🙂

ZacckOsiemo•10/11/24, 1:01 PM

if you just ask the question someone may answer

Dtynin•10/11/24, 2:12 PM

Hey guys, what do you think? Is the use of Proprietary software better than Open-source software in Critical systems such as those used in healthcare, aviation, or government? I'd like to know your judgments when it comes to critical systems. Let me hear your view.
@Middleware & OS @MCU, MPU & Firmware

DDtynin Hey guys, what do you think? Is the use of Proprietary software better than Open...

ZacckOsiemo•10/11/24, 2:27 PM

If it's a critical software some part of it will surely end up being proprietary and depending on how you develop some parts of it will be open source, I think this is a very wide net cast here. Keen to see what others feel

DDtynin Hey guys, what do you think? Is the use of Proprietary software better than Open...

Ming•10/11/24, 2:33 PM

Define 'better'!
Do you any kind of networking? If so, they are probably using something from the BSD TCP/IP Stack - which is open source.
Do these services run on a server? If so they will probably be running Linux - which is open source.

Having worked in all of those sectors, what you may find is that they want a 'supported' version of things. That's why they want something like RedHat or Ubuntu. These are still open-source

they just come with a support contract and a phone number that the customer can use to shout at some poor techie when something goes wrong.

aying for something != closed source

nour_oud•10/11/24, 2:46 PM

@here 10 minutes until our event: Embedded or Not, Virtualization is Headed Towards a Device Near You
Don’t miss it!
https://discord.gg/7YmCCMFe?event=1293245463713288233

nour_oud•10/11/24, 2:54 PM

Event Link: https://app.livestorm.co/devheads-community/devheads-weekly-office-hours-1

ZZacckOsiemo If it's a critical software some part of it will surely end up being proprietary...

Dtynin•10/11/24, 3:19 PM

well..I concur, was wondering what could be the view of others on it.

UUmesh Lokhande Hi @Roshan Baig Mogal Great, these days in *Engineering Hour* covers wide topics...

Roshan Baig Mogal•10/11/24, 6:23 PM

Hi @Umesh Lokhande,
Thanks a lot for the playlist. I will check that one and today's session on virtualization was very informative.
Thanks!

Aasefmo hi!

techielew•10/11/24, 7:27 PM

Yes there are some community members who work with it. What's your question/issue, Asefmo? BTW, welcome. (@zacck lives under a bridge and eats all manner of bones)

RRoshan Baig Mogal Hi @Umesh Lokhande, Thanks a lot for the playlist. I will check that one and to...

Umesh Lokhande•10/12/24, 3:15 AM

Hi Roshan, Welcome! Glad to know you found today's session useful.

Accur4te•10/12/24, 3:56 PM

Hey everyone, I'm currently working on an electromagnetic flow meter project and have finished the assembly, including the electrodes and Faraday cage. Now, I’m moving on to the circuitry, but I’m facing some challenges. The signals from the electrodes are in the mV range (or smaller), so I’ll need an amplifier circuit for proper signal processing. Additionally, I’m looking for a suitable H-bridge or similar setup for controlling the electromagnets.

As a second-year undergraduate student, I don’t have enough experience to confidently move forward with the design. Could anyone recommend resources or guidance on how to approach the circuit design for these requirements?

wafa_ath•10/12/24, 5:57 PM

Elon Musk has officially announced the launch of Tesla’s Optimus robot, designed to handle many of the same tasks we saw in the movie .

The price for one unit is around $20,000, which many consider to be quite affordable for American households and even internationally

What are your thoughts on its impact on automation, and would you get one?

Wwafa_ath Elon Musk has officially announced the launch of Tesla’s Optimus robot, designed...

Marvee Amasi•10/12/24, 6:51 PM

almost a real life Jarvis from Iron Man tho . But jokes aside, the Optimus robot can really do tough jobs, it might change how factories and businesses work. Is Tesla using their existing neural networks for control, or did they build something new for this robot?

Could be implemented in any tbh We were aiming with zynq but backed out due to financial constraints

Similar Threads

Similar Threads

Similar Threads