WInteresting 
Does it happen often?
Does it happen often?WAnd as I understand correctly you can apply config and read it back?
AI’d say it happens a decent amount yeah, I think usually after using the emergency switch (I generally use that when I pause to go get up and do something)
AEverything appears to function normally though
WSo it's reproducible until you restart the controller, I mean restarting the GUI doesn't fix it.
AYeah, rebooting the config tool doesn’t fix
ASorry, shoulda said that
A(Feels like one of those annoying bugs you can never repro, but analyzing the the code you find it’s a possible state, but logically should never happen 
)
)
Sare you connecting to a motherboard usb? is your cpu amd?
ANope, connected to a powered hub. And nope, Intel system. To be clear though, nothing else about the device isn’t working, it seems to just be a software/firmware bug between the device and the config app
Ais it bad for a motor to get up to 60c? Just after a play session I noticed temp_y at 60, and temp_x around 37
WIt's normal after intense load
Agtk! just wanted to make sure it was expected
VAny recommended print settings for the throw limiter? Infill etc?
RSo I just got my Rhino kit running. Still a newb when it comes to the software. Is there a way to globally tune tune down the X spring force? It seems like whatever values done at the effects tab get overwritten by programs such as DCS. Should I be using TelemFFB?
WYes, the sliders in the Settings tab adjust global strengths
RRight, but I specifically want to tune down the X axis of the spring force, which I think the Settings tab doesn't have right?
SHi Walmis. Just got my Rhino and am testing it. Very impressed by the build quality and ease of setup so far. I have a question though. I have a Virpil T50 grip attached and I can’t seem to make it recognize the analog brake axis. (Pinky lever). Any ideas? I tried the windows USB controller calibration but it doesn’t seem to want to calibrate that axis
MI think mine just worked when i used the axis assignment in dcs
WHi, you need to activate the VPC T-50 profile in the VPforce configurator and calibrate it there too.
W
SAh. Didn’t see that. Thanks so much for the quick reply! It’s working great now
Rgetting an error message for the end stop setting. "Motor X: Fault_Unexpected_D_Current" any help?
WAhh, protection kicking in. I'll tweak the firmware tomorrow.
Rthank you. also i'm getting an input on button one whenever i'm moving the stick from one extreme to the other. would this be on my end?
Rif i hold button 1 down and move the stick it switches to a different button
RHnmm, I'm not getting any analog axis on the F-16 WinWing grip. The grip type is set to WinWing adapter, and the buttons all work. But none of the analog axis is working. When set to debug mode, the last 9 bits are always 00. Is there something else in the setting I need to set?
WMaybe you need to calibrate it with a wingwing base? I think WW stores calibration in the grip.
TI found mine worked in game but showed differently in VP
R@walmis I've printed and fitted an 11 degree version of the throw limiter (thanks for making it available!). After running the auto calibration I'm finding the throw is shorter with master gain back at 100%. If I set master gain to 0% the throw reaches the newly calibrated full deflection. I haven't checked if it's related to a particular force effect yet, only master gain after I noticed the shorter throw.
RDeflection as shown in the axis graph in the configuration app (the physical deflection isn't affected). I also see the same reduced throw in other joystick testers.
WHey, check out the
Force comp. parameter, it should help with this issue. Recommend to try the Rhino defaults.
L
WYou need to open up the "Tune" dialog for friction and play around with the values to get a stable response, also you may need to increase the filter bandwidth, try 8-10 Hz.
Lworks with P = 2
RYep! Re-calibrating the grip with WW's base worked! I guess somehow the stored value got messed up.
RThank you so much!
PSo I won't be able to buy just the WW grip I'll need the base too for calibrating it? Thank sux, I wonder if Virpil is the same?
WNot sure, might work out of the box. First time I heard this instance.
RYeah, it seems like that might be the best case, at least for me. Everything was working on the WW base before I transplanted it to the Rhino. Buttons works, but not the axis. Then, I went back to WW's base and recalibrated it and all the axis are working now. It could also be that I was working from a motor/pcb kit and had do the wire harness myself, and somehow that tripped the grip's memory during the whole process, so the calibration value had to be redone. In any case, I think it would be prudent to get the base.
Pwould it be possible to implement this type of calibration into the Rhino software in the future?
Athe manual needs stuff on how to use the ww adapter, btw
KVirpil doesn't require this and all axis can be calibrated in the VPForce config tool.
BThat’s my experience. The DLC axis on the VFX grip works a charm. I can finally wrestle the cat down to the deck!
MWorked for me out of the box, got my ww f16 grip a couple of days ago
SIs anyone experiencing crashes on mission load in DCS 2.8 OB? Seems to be a problem with helicopters. Wondering if I have a conflict somewhere in DCS settings.
Wtry checking the dcs.log file
MWhen did you update? Is mission made before update? And are you trying single thread or multi thread version?
SSeems to be related to VR. No issues with 2D. Still debugging. #
SNext question is: I only get stick shake effects on WW2 aircraft. Are there supposed to be periodic effects like stick shaker or weapon effects in DCS for modern aircraft?
