Computer goes to sleep, monitors wont wake up
My monitors and peripherals all go to sleep, but the PC itself questionably goes to sleep. If I tap a key or move my mouse, the peripherals wake back up, but my monitors declare that there is no signal. I suppose my computer does something akin to sleep, but the lights and everything remain on. I mention this because I hear my gpu fans quietly kick on when trying to wake it up. I only just swapped to bazzite as my first linux distro about a week ago on a new drive and this is the only issue I have with it right now. I see solutions online, but I don't fully understand how to implement any of them. I'm not familiar with how to navigate the terminal, but very willing to learn. I just need a little help. I came across a post mentioning disabling the iommu for my amd graphics card through GRUB?
Linux 6.16.4-116.bazzite.fc42.x86_64
AMD Ryzen 9 5900X (24) @ 4.95 GHz
AMD Radeon RX 6700 XT ...
Quadro P2200 Not showing up in Nvidia settings
Quadro P2200 is supported by the driver version identified in Nvidia settings, 580.95.05. My P2200 shows up in lspci. How do I enable dual GPUs?
Vivaldi scales incorrectly on second monitor
If I fullscreen Vivaldi on my main monitor and move it to my second monitor with keyboard shortcuts, it scales incorrectly (see attached image). The window itself seems to actually be fullscreen, but the UI does not scale correctly so interacting with the window is basically impossible since I have to guess where every button is actually located. From this point on, any time I interact with something else and then this Vivaldi window, it will shrink again. When the window is in windowed mode, th...

No audio coming of jack headphone plugged to motherboard
Hi everyone,
Here are my specs :
```
%%%%%%====%%%%%%%%%%
%%%%%%%% %%%%%%%%%%%%%% bazzite:stable ...
%%%%%%%% %%%%%%%%%%%%%% bazzite:stable ...

Accidentally disabled monitor device
I tried to re-arrange my screens. However, I accidentally disabled a monitor; and dont know how to turn it back on, since its not shown anymore.

Bazzite + Bluefin? + Question about rebasing
I've recently read about the Bazzite-dx-nvidia package and I am very interested. What happens if I have been using Bazzite for a while a then rebase to the bazzite-dx image?
Alternatively is there a way to combine the gaming compatibility and capability of bazzite with the integration for development purposes in bluefin?
Thank you...
Issue installing brew cask
I'm trying to install a cask using brew with this command:
As I understand, casks should technically be working?...
brew install --cask font-jetbrains-mono-nerd-font
brew install --cask font-jetbrains-mono-nerd-font
Solution:
I deleted the fonts folder and now brew could install the font. Not sure why, don't understand, but whatever. 😄
Grub
Hello i tried to change grub settings with chat gpt (at least now i know it s stupid) to boot on m’y usb with batocera when pluged and on bazzite when not, but it went wrong and now i have a grub menu needing a keyboard at each launch and if i dont touch anything it tries to boot on my usb stick but it doesnt Even work and i m stuck in a loading and havé to restart pc, if i unplug the usb it tries to boot on one, fails and i m back in the boot chooser still needing a keyboard Even if it says « now trying to boot on ssd «
I can t find anything to reset grub to default online and trying to delete what i changed doesnt work, or i forgot some parts of what i changed...
Failed to start systemd-cryptsetup. What to do?
Hi, I installed a Linux distro for the very first time on my new pc. In the installation the installation manager asked if i wanted to encrypt my drive and i said yes and chose a password. After the installation was completed the system rebooted. But now i'm stuck. Bazzite wants my to enter my password two times and about 3-4 min in of loading it goes into emergency mode. Whatever that means... I can't do a new installation either because my drive is now encrypted. What can i do? Help is much ap...
Kernel Panic Error - Trying to dual boot Windows 11 and Bazzite
Hey friends,
I'm in the middle of trying to set up a dual boot situation with Windows 11 and Bazzite. However, after booting into the Grub menu and selecting the Bazzite ISO on my USB drive, I get a kernel panic error that says it's out of memory.
Here's things I've tried or done already as per the instructions in the documentation and the recommended YouTube video: ...
Solution:
I was able to discover and implement the solution to this error myself. So I'm going to document the solution and mark it here as solved for anyone else running into this issue.
For my motherboard (Asus tuf gaming z790 -plus Wi-Fi), I had to disable both secure boot as well as TPM. In addition, the live ISO won't allow manual EFI system partitioning which is required for dual booting. So after disabling secure boot fastboot and TPM in your bios, make sure you flashed the non-live ISO to your USB drive. Then you can follow the instructions in the video from Mike's Tech tips....
A lot of Ram usage for no reason
I finaly found the culprit, i has having a LOT of freezes while trying to play some games, it seems that if my ram usage max out my entire pc freeze forcing me to turn off and on my pc for it to restart, for some reason without no applications open my ram is at 3 Gb of usage, How do i fix this problem?

Wired controller disconnect/re-connection issue
While Steam Input is turned on if my controller comes unplugged most games reports a "Controller Unplugged" with the prompt to press any button to plug it back in. When I reconnect the controller it can operate the Steam overlay, but the game doesn't register input.
Further details:
I'm using a mix of controllers (Xbox One, PS4/5, Switch) all using a magnetic USB cable, this occasionally comes loose causing the disconnect.
This is issue in Cyber Punk 2077, Binding of Isaac, Deep Rock Galactic Survivors, Power Wash Simulator, basically any game that has Steam Input enabled....
Lutris rendering issue with Battle.net Launcher
Running into an issue where elements of the bnet launcher are rendering outside of where I would expect it to be. If I click maximize window a few times quickly, I can force the elements to render properly and then adjust the window size, but closing the app to the system tray and re-opening causes the rendering issue to occur again.
I've made a recording of what the issue looks like. I was going to post an issue to the Lutris repo, but they've blocked issue creation to contributors only.
https://www.youtube.com/watch?v=9cFoUNAA98g...
Monitor switching sometimes appears frozen
I use Bazzite among 2 computers hooked up to my monitor (TV), when I switch the input to toggle between the bazzite computer and the windows computer. Bazzite doesn't always show the display, sometimes it's a black screen, sometimes it's a frozen screen. however switching off and then back to bazzite again USUALLY restores video. The same issue does not occur going from bazzite to windows, so I'm 98% sure it's not the TV. Does anyone have any thoughts on how I can eliminate this frozen / blan...
Bluetooth headset
Hi everyone using my Bluetooth headset in bazzite it works great but when I go back into windows I have to reconnect headset is there a fix on this please guys
Legion Go audio and Virtual keyboard
Hi everyone, I need help with some settings.
I installed Bazzite OS on Legion Go and sometimes the audio crackles a lot. How can I fix this?
I also wanted to know how to bring the virtual keyboard into desktop mode so I can interact with it, and how can I change its size?...
Smart Card Reader
I'm trying to set up my Bazzite system so that it can read my Smart Card and let me access sites that require it.
I initially followed this guide to have it work on a distrobox, however it did not appear to ever actually work? At least, the last steps didnt seem to do anything.
https://discord.com/channels/1072614816579063828/1395685796828414103
...
Panel locking
Okay ive looked around for a bit and cant find my answer in ubluediscorse, bazzite doc, and chagpt didnt help.
Panels on bazzite seem to unlock and move on their own on occastion without my intent for them to do so, is there a way to lock them? or can some kinda command causes this?...

8Bitdo Ultimate 2 Wireless
Product page says it works out of the box, but I'm not getting any input from the paddles or extra shoulder buttons. Has anyone successfully set up this controller in Bazzite?
